Project SicMonte

[SicMonte]

And here we have a ridetech TQ Coilover for the front of a G Body...when using the ridetech lower control arms.






The first step in assembling these coilovers is to put on the lower spring mount/adjuster. This is usually done from the bottom of the shock but this is not possible on the TQ series due to the reservoir hose...so the lower spring mount needs to go on from the top. This is a seriously tight fit so the guys at Ridetech gave me a lil trick of the trade.......put a thick washer in the open space on the spring mount to widen the inner diameter and the mount will slide right over the shock body to the threads. BINGO!!!!!!!!!