Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 348

    Hybrid View

    1. #1
      Join Date
      Jan 2015
      Location
      Australia
      Posts
      285
      Country Flag: Australia
      Hi All. Just a quick update as we are still awaiting my wheels to arrive so i can get my axle sized up.
      The rear suspension arrived and the quality from chassis works is as good as the sway bar that arrived earlier. We have fitted the suspension cradle, chassis rail connectors and the cross support. It looks great and looks like it will be as stiff as a board.
      We have started to tackle the dreaded front fenders and are making great progress. We released the fender supports and adjusted the position of the top of the fender and how it sits. After a day of adjustment and fender on , fender off, cutting, welding and adjustment i am beginning to believe we are making great progress. We have cut the bottom of the fender completely off for now just below the rocker panel line with a view to a possible customization which could involve lengthening the rocker panel to the wheel arch.
      We have seen this done on a Ring Brothers car and its one of those mods that has people scratching their heads wondering what looks different about the car but can't put a finger on it. Ring Brothers did a great job on theirs but they are also very skilled and have a multitude of tools and trades at their disposal. We are but two people with a passion and a spare garage.
      If we could pull this off it will solve the problem of unusable aftermarket fenders that are literally too short. We also have the option of welding and extension piece in but the former option is rather exciting.
      Enough rambling for now i'll post some pics.
      Craig.



    2. #2
      Join Date
      Jan 2015
      Location
      Australia
      Posts
      285
      Country Flag: Australia
      Rear suspension cradle from Chassisworks.Name:  20160702_153825.jpg
Views: 1729
Size:  63.0 KB

    3. #3
      Join Date
      Jan 2015
      Location
      Australia
      Posts
      285
      Country Flag: Australia
      Chassisworks Rail connectors and stiffener.Name:  20160710_131518_001.jpg
Views: 1693
Size:  113.2 KB

    4. #4
      Join Date
      Jan 2015
      Location
      Australia
      Posts
      285
      Country Flag: Australia
      This is a before shot of the fender.Name:  20160723_184210.jpg
Views: 1725
Size:  120.8 KB

    5. #5
      Join Date
      Jan 2015
      Location
      Australia
      Posts
      285
      Country Flag: Australia
      This is after many adjustments. Nearly there but not quite!!Name:  20160723_183959.jpg
Views: 1714
Size:  111.1 KB

    6. #6
      Join Date
      Jan 2015
      Location
      Australia
      Posts
      285
      Country Flag: Australia
      AnothName:  20160723_183952.jpg
Views: 1682
Size:  134.9 KBName:  20160723_184057.jpg
Views: 1716
Size:  110.8 KBer shot.

    7. #7
      Join Date
      Jan 2015
      Location
      Australia
      Posts
      285
      Country Flag: Australia
      Did I mention how bad aftermarket panels are, even the qtr panel ornament brackets are welded in the wrong position. We have had to release the welds and move the mounting bracket accordingly followed by the required amount of panel beating to get them to sit any where near acceptable.Name:  20160723_184225.jpg
Views: 1735
Size:  85.3 KB




    Advertise on Pro-Touring.com