1970 GTO Version 2.0

[FirstGenZq8]

One of the things that I really want to do before RTTH (Run through the Hills) in September is to give the wheels a makeover. I have 3 piece Kinesis wheels that can be taken apart. The great thing about being able to take the wheels apart is that it makes it very easy to clean them or give them a new look. Here is the wheel taken off the car:



The outer lips were once polished but have since dulled. Not very pretty at all. The centers look OK but I want a slightly different look. There are 40 bolt around the circumference of the wheel. Once the bolts are taken out, the center separates from the inner and outer rim.





The wheels get very dirty on the inside from driving. Don't ask me how this happens, but there were actually dead bugs stuck to the inside rim. Here is a dirty rim:



Here is a rim after some time with Purple Power and a red scotch brite pad:



I am going to clean up all of the inside rims and paint them silver. The pain will make clean up much easier. The outer rims will get re-polished for a nice, bright finish. The centers are going to get hard anodized and Teflon coated for extra durability.

I also measured the front wheels for the C6 ZO6 brakes that I have coming from Kore3. It's close, but it will clear.



Andrew

andrew, i love all of your detailed posts. any chance that you've weighed your wheels when you've had them off of the car?