Results 1 to 18 of 18
Thread: Damper position...
Threaded View
-
05-10-2021 #2
Registered User
- Join Date
- Aug 2004
- Location
- Red Deer, Alberta, Canada
- Posts
- 1,364
Is the small diameter of the balancer against the seal or is the larger diameter the sealing surface? I believe the smaller diameter is the sealing surface and with that said, the balancer is the wrong offset if nothing lines up.
edit: when you remove the balancer bolt and washer, is the crank flush with the surface of the face where the balancer washer sits?Matt
72 Chevelle 370ci, 76mm single turbo, TKX, Speedtech Track Time, Millerbuilt Strange full floater 9", Brembo brakes, BC Forged 18x11s with 315s square
Instagram: Cst_koon
-
Reply With Quote
