Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 6 of 11 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 LastLast
    Results 101 to 120 of 210
    1. #101
      Join Date
      Apr 2004
      Location
      OKC, OK
      Posts
      3,739
      Country Flag: United States
      Quote Originally Posted by CarlC View Post
      So how does the fuel enter the sump?
      Weep hole in the bottom allows the tank to self level. Once fired, the return fuel is dispensed back in to the well making sure the pump is submerged at all times.
      Mike Redpath
      Musclerodz & Customz
      405-288-0189
      pro-touring parts specialists
      Musclerodz.com

      facebook page
      http://www.facebook.com/#!/pages/Mus...73054649402015
      instagram
      Musclerodz

    2. #102
      Join Date
      Jan 2007
      Location
      SOCAL
      Posts
      623
      Quote Originally Posted by balljoint View Post
      Made for own. $96.00 tank from rock auto, $20.00 fuel level sender, scrap steel plate I had sitting around and a sending unit with pump from 94 LT1 I also had sitting around. Also baffled the tank.
      Good job! I wanted to try, but I got a little nervous....opted to buy one. I have never welded before, could of have had a friend to it, but......

      Congrats on a great job.

    3. #103
      Join Date
      Mar 2008
      Location
      North Bend, WA
      Posts
      343
      Country Flag: United States
      Balljoint,

      How many hours of labor did that take (approx.) ?

      Mike

    4. #104
      Join Date
      Jan 2008
      Posts
      26
      Country Flag: United States
      About 3 hours. Could not bring myself to pay the $450-600. Some places are $1000

    5. #105
      Join Date
      Nov 2006
      Location
      Clintonville,WI
      Posts
      14
      Quote Originally Posted by MuscleRodz View Post
      The difference is the number of vents. You can use the earlier tank with no vent if you eleiminate you emissions canister
      Thank you Mike! How much would you be selling this tank with shipping? How close are you to Rockauto? I too would hate to not give you a chance.
      1973 Camaro Pro-tour theme
      1985 Camaro IROC Silver TPI
      1997 LT4 #18/100 30th SS
      2002 Z7D,Brickyard 400 Festival car
      http://www.aasencamaros.com

    6. #106
      Join Date
      Jul 2001
      Location
      Detroit, Michigan
      Posts
      6,854
      Country Flag: United States
      Mike I would also like to help out a sponsor. But I'm on a budget and can't afford that amount of difference. Can you work with us?

      If not I understand. I just want to make sure I come to you first.
      1968 Pro-Touring Camaro LS1

      Project: Next Year
      - Start date; June '01
      - Completion; Sometime next year or the year after.....

    7. #107
      Join Date
      Apr 2004
      Location
      OKC, OK
      Posts
      3,739
      Country Flag: United States
      Go to Rock Auto. I wish I could compete but they are buying direct and required a 300 piece buy in which eliminated me from buying direct. Thanks for at least thinking of me.
      Mike Redpath
      Musclerodz & Customz
      405-288-0189
      pro-touring parts specialists
      Musclerodz.com

      facebook page
      http://www.facebook.com/#!/pages/Mus...73054649402015
      instagram
      Musclerodz

    8. #108
      Join Date
      Sep 2007
      Location
      Thehoodstock,GA
      Posts
      793
      Country Flag: United States
      Balljoint,
      Did you take any pics of the baffles inside the tank?

      Quote Originally Posted by balljoint View Post
      Made for own. $96.00 tank from rock auto, $20.00 fuel level sender, scrap steel plate I had sitting around and a sending unit with pump from 94 LT1 I also had sitting around. Also baffled the tank.
      MarkK

    9. #109
      Join Date
      Jan 2008
      Posts
      26
      Country Flag: United States
      No pics, but I used a small $5.00 baking pan from walmart and welded to the bottom of the tank. Then drilled a hole on the side to allow gas in and slowly out. Pump and strainer sits in it nice. Pan is about 7 inches long X about 3 inches high. I am not trying to discourage people from buying any other product. I just wasnt born with a big trust fund and if I can save a few bucks, I will. I have more time than money.

    10. #110
      Join Date
      May 2000
      Posts
      4,151
      Country Flag: United States
      Quote Originally Posted by balljoint View Post
      No pics, but I used a small $5.00 baking pan from walmart and welded to the bottom of the tank. Then drilled a hole on the side to allow gas in and slowly out. Pump and strainer sits in it nice. Pan is about 7 inches long X about 3 inches high. I am not trying to discourage people from buying any other product. I just wasnt born with a big trust fund and if I can save a few bucks, I will. I have more time than money.
      Did you mig weld that piece in?

    11. #111
      Join Date
      Jan 2008
      Posts
      26
      Country Flag: United States
      yes, slowly. Then pressurized air into the tank with soap water on the welds to find the small leaks.

    12. #112
      Join Date
      May 2000
      Posts
      4,151
      Country Flag: United States
      Quote Originally Posted by balljoint View Post
      yes, slowly. Then pressurized air into the tank with soap water on the welds to find the small leaks.
      Thanks. I'd imagine the metal on those tanks are fairly thin.

    13. #113
      Join Date
      Nov 2006
      Location
      Clintonville,WI
      Posts
      14
      Quote Originally Posted by MuscleRodz View Post
      Go to Rock Auto. I wish I could compete but they are buying direct and required a 300 piece buy in which eliminated me from buying direct. Thanks for at least thinking of me.
      Thanks Mike, I did go to RockAuto but I found out that I got charged Sales Tax, no biggie. RockAuto is based in Madison WI, therefore I got taxed, oh well.

      Thanks for the help!

      1973 Camaro Pro-tour theme
      1985 Camaro IROC Silver TPI
      1997 LT4 #18/100 30th SS
      2002 Z7D,Brickyard 400 Festival car
      http://www.aasencamaros.com


    14. #114
      Join Date
      Dec 2006
      Location
      So Cal
      Posts
      920
      Quote Originally Posted by Xlerator View Post
      Thanks Mike, I did go to RockAuto but I found out that I got charged Sales Tax, no biggie. RockAuto is based in Madison WI, therefore I got taxed, oh well.

      Thanks for the help!
      Probably saved a little bit on shipping compared to what I paid to get mine to So Cal, cost me about $75 for shipping.
      Bart F.


      '64 Tempest - LS3/4L70E - Grandma's Poor-Touring car
      '64 GTO - 455 HO/TH400 - Ex-bracket racer, street bruiser
      '02 WS6 convert - LS1/4L60E - Pure stock, pure pleasure

    15. #115
      Join Date
      Dec 2006
      Location
      Los Angeles
      Posts
      334
      Great thread.

      Don't forget about the 91-96 Impala/Caprice/Roadmaster (sdn) tanks. They are plastic, big, and can fit quite a few applications.
      Current: 2010 CTS-V
      Sold: '65 Pontiac, '08 TBSS

    16. #116
      Join Date
      Sep 2007
      Location
      Thehoodstock,GA
      Posts
      793
      Country Flag: United States
      Do tell!

      Quote Originally Posted by Karch View Post
      Great thread.

      Don't forget about the 91-96 Impala/Caprice/Roadmaster (sdn) tanks. They are plastic, big, and can fit quite a few applications.
      MarkK

    17. #117
      Join Date
      Dec 2006
      Location
      Los Angeles
      Posts
      334
      Quote Originally Posted by BossaNova View Post
      Do tell!
      If you do a search, there's a guy here that has a first gen (I think '69) Camaro that put one in with little modifications. I think he used a heat gun on one corner of the tank to massage it to fit.

      My buddy has a '73 Grand Am and he said it's fitting perfectly, and my '65 GTO, while I don't have it in yet, it should fit w/o too much modification.

      On mine, I am cutting out a 12"x12" section of my trunk floor and adding an access panel, which you can buy for about $15-$20, that is basically a hinged door so you can access the pump/pickup module.

      I may need to raise my trunk floor a bit in the middle to clear the hump on the tank, but for what you can get a tank for at the junkyard, it does make an inexpensive alternative.

      I got a spare pump/pickup module that I removed the pump from and have the option of using it to feed an external pump, whether carb or efi, though it won't be sumped (preferred).

      But, these Spectra tanks are also a very nice option.

      Lastly, I believe Walbro makes a 255 lph high and standard pressure pump that will fit without much trouble.
      Current: 2010 CTS-V
      Sold: '65 Pontiac, '08 TBSS

    18. #118
      Join Date
      Mar 2009
      Posts
      1

      66 nova LS2

      i need a stock gas tank that will bolt up in the stock location with built in pump that will work on my 66 nova with LS2 engine anyone know where i can get one besides Rockvalley

    19. #119
      Join Date
      Aug 2004
      Location
      Houston TX
      Posts
      292
      Country Flag: United States
      Does any know the line sizes coming off the spectra tank 3/8? 5/16?

      Thanks

    20. #120
      Join Date
      Sep 2007
      Location
      Thehoodstock,GA
      Posts
      793
      Country Flag: United States
      I pm'd you.
      I hope the big shots are cruising this forum......Chevy II's need love too!


      Quote Originally Posted by just chevy View Post
      i need a stock gas tank that will bolt up in the stock location with built in pump that will work on my 66 nova with LS2 engine anyone know where i can get one besides Rockvalley
      MarkK

    Page 6 of 11 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 LastLast



    Advertise on Pro-Touring.com