Jason's 67 pro touring Camaro

[joeko23]

Jason, have you thought about putting PPF on the car to protect paint? Thinking to do this to mine when it’s finally done with paint.

[TANKMASTERJ]

Jason, have you thought about putting PPF on the car to protect paint? Thinking to do this to mine when it’s finally done with paint.

Yes and I already have so many tiny rock chips. I didn't realize how bad these wide sticky tires cause it. I'm thinking run a couple years and when the lower quarters and rocker look crappy, to have them re shot and blended then have that applied. I'm thinking maybe it's too late now I'm I don't really know.

[joeko23]

That sucks! My painter said to wait at least 6 months before applying the PPF to make sure the paint fully cures and airs out. Wow that means I can’t drive the car because I’ll def get rock chips.

[TANKMASTERJ]

So I've been out and won some car shows. Happy about that but time to work on white lightning again.
Added a Mamo ported MSD, NW103 and 850 injectors.
Now for a tune and I'm going to try GPI in Jacksonville Arkansas as I wasn't ever fully happy with my last tune.
Also had clearance issues with the MSD and my Wegner accessories drive. So I purchased some Supercharger intercoolers .400 thick spacers. They sell them for insulated supercharger applications but was just what I need to clear the water pump and stuff. Included a pic of those on the heads.

[ryeguy2006a]

Looks great! Glad to see you out enjoying the car!

[TANKMASTERJ]

Thanks Ryan
What are you working on now. I'm just starting on a 74 C10.

[ryeguy2006a]

That Square body sounds nice. I'm keeping my eyes out for a solid bodied truck to build too. Either that or a late 80s F150.

Sold my 68 Camaro a few years ago now, and picked up a 55 Nomad project. I've got a build thread here, it's taken a lot of work to get it to where it is now.

[chevyz240]

Ok so I'm tinkering again. I installed my LS7 emblems and I think they look pretty good. I also cut a grille pit of some aluminum mesh. I lined the outer perimeter with se black rubber for the pop effect next to the aluminum grille and white grille surround.
I'm happy with the end result.Attachment 201235Attachment 201236Attachment 201237Attachment 201238Attachment 201239

As I've said before, everything looks super nice and clean! Very well done, Jason!

Is the grille surround a stock Chevy piece? I don't think I've seen that version before. Or maybe I just notice it because it's white. I haven't seen the aerodynamic rounded inlet design before (I think).

[TANKMASTERJ]

As I've said before, everything looks super nice and clean! Very well done, Jason!

Is the grille surround a stock Chevy piece? I don't think I've seen that version before. Or maybe I just notice it because it's white. I haven't seen the aerodynamic rounded inlet design before (I think).

Henrik,
It's a custom piece that somewhat mimics a 69 by being inset rather than flat like a 67. A guy used to make these and sell them on eBay and then he vanished!
Jason

[chevyz240]

Henrik,
It's a custom piece that somewhat mimics a 69 by being inset rather than flat like a 67. A guy used to make these and sell them on eBay and then he vanished!
Jason

Cool! Then my eyes weren't lying to me! ;)

[berdunord]

It's been a long time I did not look at your thread, she looks awesome ! Congrats Jason !