icemanrd19 67 camaro

[68Cuda440]

Randy - buy it already!!! Your car was painted before mine went to the shop... you can't have me finish first!

PS. Congratulations on kiddo #2.

[68Cuda440]

By the way, you now have 1 boy and 1 girl.

Time for you to take a trip down to Austin.

http://www.urologyteam.com/our-doctors/dr-richard-chopp

Yes - that really is his name!

[icemanrd19]

480 hp it is. Its time i treat myself to a nice present

[MCB Matt]

480 hp it is. Its time i treat myself to a nice present

Congrats!!! On both your child and your new heart for the toy!

Time to get to work soon!
Matt

[AZ's68]

Hey iceman, very nice work on that badass car. I have a '68 that I completely disassembled and it's been that way for a couple of months now. I'm in Forney and would love to come see your car if it was ok? I would love to get some motivation and try to get back on track on mine. pm sent

[icemanrd19]

Any vendor sell the following?

DSE battery relocation kit, Hooker t56 crossmember, and autokraft oil pan? I like to buy everything from the same vendor.

[wally_245]

Did you try Matt's Classic Bowties? I have dealt with Kim..

[email protected]

shawn

[icemanrd19]

Ive always dealt with MCB.

I already ordered the oil pan today. Done deal.

Guess ill order my crossmember now. Anyone had luck with the hooker one?

[icemanrd19]

Just ordered the hooker t56 crossmember from jegs, speartech firewall grommet, and already ordered the autokraft pan.

Now onto accessories, DSE battery relocation kit, radiator, vintage air, seats, fuel lines, brake lines and exhaust

[Erik Beckett]

You posted for the front tires you used a 275/30/18? I am not seeing that size available anywhere. Can you confirm that please?
YOUR CAR IS BAD ASS!!!

Thanks, Erik

[wally_245]

That's the one I was planning on going with. I saw the video of the guys from Roadkill install it in the Crusher Camaro and it looked pretty damn good.

[Lopez05]

Amazing car. You are doing everything right in my opinion. Great job. Sincerely, a very jealous viewer.

[icemanrd19]

Sorry I'm actually running 275/35/18s and 315/30/18

http://www.hurst-drivelines.com/wp-c..._kit_large.jpg

I already have the Hydrolic throw out bearing with my T56 kit set up with the exact fittings on the one above. Problem is I had to remove the bottom fitting and screw the line directly into the throw out bearing. My pace performance kit didn't come with the quick connect line fitting. Not sure if this is common or not.

Either way i need the bracket connected to the firewall,master cylinder, master cylinder firewall mount bracket*, remote mount reservoir

Wonder if i can buy the kit without the throw out bearing?

[icemanrd19]

Hooker t56 crossmember. This crossmember would have been perfect if the top part of the arc wasn't soo high. Right now I'm cutting the hat off of each of them and tomorrow i will weld a plate underneath the arc instead of on top.

[icemanrd19]

MCB i need the following :

dse stainless steel Bolt Kit - P/N: 010801
Dse quadralink tow hooks - P/N: 040305
Dse C6 Throttle Pedal Bracket- P/N: 060111
Dse battery relocation kit P/N: 121701P Applications: 34/78 Kit - Polished

[MCB Matt]

MCB i need the following :

dse stainless steel Bolt Kit - P/N: 010801
Dse quadralink tow hooks - P/N: 040305
Dse C6 Throttle Pedal Bracket- P/N: 060111
Dse battery relocation kit P/N: 121701P Applications: 34/78 Kit - Polished

No problem, I will have a PM quote over to you in just a few!
Thanks again for the business!
Matt

[icemanrd19]

Called and no answer. Sent you a PM back. ready to buy


_______________________


Called back. Placed order. Thank you MCB. I only use you for my online purchases and for any future engine purchases pace performance.

Pace picked up my cracked engine today and have really helped me out. Pace performance by far went above and beyond to help me. Buy from these two vendors

[MCB Matt]

Phones have been crazy today, Kim said she talked to you and got your order in.

Thanks again, we appreciate your business
Matt

[icemanrd19]

Engine/ transmission setup is now in the car. Some of you know about my engine cracking while installing the previous engine and transmission. This time everything went very very smooth. To install the engine in the car, drop the subframe, flip the fuel lines, install new oil pan, clutch, flywheel, bell housing and transmission it took all of 2 1/2 hrs.

Big thanks to www.rodscarcraft.com and pace performance.

The hooker crossmember doesn't fit well at all. Maybe with their motor mounts and headers but not with my stainless works setup and dse motor mounts.

[icemanrd19]

Also forgot to put anti seize on on my drivers side front subframe bolt for the core support. As soon as i tightened it up i remembered and started to take it back off. Well now the damn bolt has stopped half way. Any trick to getting the dse stainless bolt kit apart and still salvaging them?

DSE / matts classic bowtie can you sell me one bolt and nut?