Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 84

    Threaded View

    1. #16
      Join Date
      Oct 2012
      Location
      British Columbia
      Posts
      614
      Country Flag: Canada
      With the installing of the mini-tubs on my '67 I needed to narrow the frame. The kit I used came with filler pieces but I ended up building a few parts myself so I could make it reinforce the way I wanted. Again with the plasma cutter I was able to pick up some plate steel and fabricate what I wanted.

      Here is the filler kit that came with the mini-tub kit;
      Name:  2013-07-22 20.33.33.jpg
Views: 1344
Size:  66.3 KB

      Here I marked out the part I wanted to cut out;
      Name:  2013-07-24 17.10.05.jpg
Views: 1340
Size:  72.6 KB

      then the cutting starts;
      Name:  2013-07-22 20.33.03.jpg
Views: 1337
Size:  87.7 KB

      Name:  2013-07-24 17.25.49.jpg
Views: 1362
Size:  79.2 KB

      Here are the filler pieces;
      Name:  2013-07-24 17.51.31.jpg
Views: 1361
Size:  75.2 KB

      Here is the long filler piece and it required a little curve at the end to close in the frame. Amazing what a good hammer and an old drive shaft can do to make the exact curve I needed.
      Name:  2013-07-24 17.26.16.jpg
Views: 1321
Size:  80.5 KB



      Name:  2013-09-25 15.32.45.jpg
Views: 1329
Size:  33.7 KB

      then the part that I cut out with the plasma cutter and welding the frame up and cleaning the welds.
      Name:  2013-09-25 15.33.22.jpg
Views: 1326
Size:  31.6 KB
      Attached Images Attached Images  
      Todd
      '14 ZL1, 6 speed and 6.2L of Super Charged Awesome!
      '67 Camaro SS in process. A long, slow, expensive trip...


      How hard can it be...

      Project Obsession
      https://www.pro-touring.com/showthre...ject-Obsession





    Advertise on Pro-Touring.com