Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 24

    Threaded View

    1. #14
      Join Date
      Nov 2011
      Location
      Riverton, Wyo,
      Posts
      330
      Country Flag: United States
      So do you think if I bought a 8ft piece of 3/16 I would be able to run it from the mc down the frame rail to center of rear body, then run flex hose down to axle to a t fitting then hard line out to left and right calipers, I also thought about 2 6ft pieces of stainless then mount the proportioning valve under the driver seat on frame rail, then it would also be out of sight, whats your thought on this Idea. thanks






    Advertise on Pro-Touring.com