Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 24

    Threaded View

    1. #1
      Join Date
      Nov 2011
      Location
      Riverton, Wyo,
      Posts
      330
      Country Flag: United States

      Brake lines need pointers

      I am just about ready to start running brake lines on 69 camaro, It has art morrison chassis, I am not sure witch direction to go, I thought about stainless, everyone says it's tought to work with, I thought about copper nickel, Just not to hip on the copper looking color, I thought about a roll of the black coated tubing that they use on the newer vehicles. If you order it in a roll, Is it hard to get straigh again? I also thought about mounting proportioning valve under car on frame so It would be out of vision. I also would like to know what you guys are using for clamps to attach it to the frame? or if you have any pics. I would imagine run the brake line down the drivers side and fuel lines down the pass side? Also what are you using for the t fitting on the front and where would be a good place for it? thanks for the advice just want to do it once and be done. I have willwood mc with hydratech booster 6 piston front and 4 on the rear

      Last edited by snappytravis; 09-06-2012 at 08:36 AM. Reason: add pic





    Advertise on Pro-Touring.com