Brake lines need pointers

[jpgolf14]

Travis,
I went the cheaper route and used a 25' roll of aluminum and it straightened out nicely. I ran it down the drivers side, mounted the T block just inside my frame rail DS. Clamps used were the 1/8 rubberized you get at Lowes, one evey 2' or so. Not hard to do- just time consuming and had to redo 2 of the flares during bleeding. There may be some pics on my thread of it...

Man, aluminum brake lines sound like a terrible idea to me. First of all depending on the kind of AL used, you are almost certainly giving up a lot of strength going with aluminum. Second AL is only 1/3 as stiff as steel. So you will have 3x the flex in the line under braking. What wall thickness are you using?