Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 296

    Threaded View

    1. #11
      Join Date
      May 2007
      Location
      Mooresville, Indiana
      Posts
      1,874
      Country Flag: United States

      Exciting parts and pictures!

      I mentioned a while back that Deb had won the Holley EFI setup, so here's a little eye candy that's getting ready to be installed on the ZZ4.



      Then because we really wanted a road race oil pan for the "new" engine we purchased this Canton pan that is really designed for a Corvette chassis. The sump is 13" from front to rear so we knew fitment would be an issue.





      Solutions; move the motor mount frame stands back 1" and cut a little off the engine crossmember. I've never been a fan of cutting on crossmembers, but I know guys alot smarter than I do it and I'm confident that I can do it without loosing any strength. I'll spare you the pictures of the first attempt where we completed it and it still interfered with the oil pan. Second attempt was much better... I really should know better than to prime and paint something before test fitting! I know the paint is not pretty, but it's the wagon and if anything should stand for "form follows function" it should be that thing!

      a little bracing before cutting


      3/16" plate steel









    Advertise on Pro-Touring.com