LT1 Optispark/timing issues

[barno68]

You posted earlier that 2and 4 sparked then the rest did not when testing then they did,you then say it sometimes catches which might be 2 and 4 trying to fire.I think I was the 1 that recommended the opti,bought the third 1 off him,as it was corroded my fault for not running the engine,as posted.Have you an alram fitted or an aftermarket wiring.

It has not fired since I put it back together this time. Later today I am going to increase the idle setpoint and give it another try. If nothing happens I will through the noid light on again and see if the injector issue pops up again. The reason I have doubts about the opti is that the cylinders were firing even when the injectors were not... Although, you never know with these things.