Results 1 to 20 of 25
Hybrid View
-
04-03-2010 #1
They only go on one way right...?
'67 Buick Skylark GS400 funny car "Ingenue" 8/10 HRM / Gasoline (Swedish) cover & feature 2/12
World's only Buick-powered Buick Funny Car!
Used to be known as musclecarjohn
www.buickfunnycar.com
http://www.facebook.com/ingenuebuickfunnycar
-
04-03-2010 #2Yes, the originals had two studs that were molded to the back of the emblem. These two studs stick STRAIGHT through the grill and than through a plate with two holes in it. Two self threading nuts hold the whole thing together from the rear. The emblem from Marquez is a very nice piece but the problem is that the two studs, when threaded into the bosses on the back of the emblem, stick out at an ANGLE and don't fit through the holes in the backing plate. It seems to me that the two threaded bosses on the back of the emblem need to be at a different angle, allowing the studs to stick straight out the back. I will post on here when I get an answer from Marquez as to what the problem is.
Mark E.
'68 RS/SS Camaro, 350 c.i./400 hp, Thumper Cam, Hurst shifter, Muncie M-21, Pypes H-pipe w/violator mufflers, 18" Rushforth Battery Wheels





Reply With Quote




