Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 18 of 18

    Hybrid View

    1. #1
      Join Date
      Jun 2005
      Location
      Lynnwood Wa.
      Posts
      248
      Country Flag: United States
      Quote Originally Posted by 4OfaKind
      Ollie,

      How does the Ford EDIS connect? (Excuse my ignorance.) Using the Electromotive unit as an example, would the EDIS provide an alternate source for the cam sync? So I would just need a trigger wheel and eliminate the distributor?
      Eliminating the distributor is so important because I plan to set the engine back behind the front axle; putting the distributor hole deep into the firewall.

      Mal
      I am using a Megisquirt ECM, (I would imagine the Electromotive ECM is the same) in that the ECM sends a 12v signal to the ignition module to fire the plugs. EDIS does not requier a cam sync. Which plug fires is determined by the signal from the 36-1 sensor wheel.

      This is the Megisquirt web site. There is a ton of info and support,
      scroll down about half way on the left hand side to the Megasquirt Support Forums.

      http://www.megamanual.com/index.html

      Oliver Shultz
      It's OK to giggle and snicker. don't laugh and point





    Advertise on Pro-Touring.com