Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 18 of 18

    Hybrid View

    1. #1
      Join Date
      Feb 2005
      Posts
      198
      Thanks guys,

      That clears things up a bit. I was planning a full sequential coil-on-plug setup but with only a crank-trigger. I guess that would not have worked to well. So I would need the sync signal.

      So I guess the question is: Is there a significant advantage to sequential coil-on-plug vs. wasted spark? (Other than the obvious timing)

      Mal



    2. #2
      Join Date
      Jun 2005
      Location
      Lynnwood Wa.
      Posts
      248
      Country Flag: United States
      Quote Originally Posted by 4OfaKind
      Thanks guys,

      That clears things up a bit. I was planning a full sequential coil-on-plug setup but with only a crank-trigger. I guess that would not have worked to well. So I would need the sync signal.

      So I guess the question is: Is there a significant advantage to sequential coil-on-plug vs. wasted spark? (Other than the obvious timing)

      Mal
      I dont know of the advantages of one ignition system over the other except the Ford EDIS is the easiest to adapt. All you need is the Ford EDIS ignition module, coil pack, a 36-1 wheel and sensor.
      Summit Racing lists cam sync distributors for chevy and Ford, use key word Hole plug or dual sync.
      Oliver Shultz
      It's OK to giggle and snicker. don't laugh and point

    3. #3
      Join Date
      Feb 2005
      Posts
      198
      Quote Originally Posted by Ollie8974
      I dont know of the advantages of one ignition system over the other except the Ford EDIS is the easiest to adapt. All you need is the Ford EDIS ignition module, coil pack, a 36-1 wheel and sensor.
      Summit Racing lists cam sync distributors for chevy and Ford, use key word Hole plug or dual sync.
      Ollie,

      How does the Ford EDIS connect? (Excuse my ignorance.) Using the Electromotive unit as an example, would the EDIS provide an alternate source for the cam sync? So I would just need a trigger wheel and eliminate the distributor?
      Eliminating the distributor is so important because I plan to set the engine back behind the front axle; putting the distributor hole deep into the firewall.

      Mal

    4. #4
      Join Date
      Jun 2005
      Location
      Lynnwood Wa.
      Posts
      248
      Country Flag: United States
      Quote Originally Posted by 4OfaKind
      Ollie,

      How does the Ford EDIS connect? (Excuse my ignorance.) Using the Electromotive unit as an example, would the EDIS provide an alternate source for the cam sync? So I would just need a trigger wheel and eliminate the distributor?
      Eliminating the distributor is so important because I plan to set the engine back behind the front axle; putting the distributor hole deep into the firewall.

      Mal
      I am using a Megisquirt ECM, (I would imagine the Electromotive ECM is the same) in that the ECM sends a 12v signal to the ignition module to fire the plugs. EDIS does not requier a cam sync. Which plug fires is determined by the signal from the 36-1 sensor wheel.

      This is the Megisquirt web site. There is a ton of info and support,
      scroll down about half way on the left hand side to the Megasquirt Support Forums.

      http://www.megamanual.com/index.html
      Oliver Shultz
      It's OK to giggle and snicker. don't laugh and point




    Advertise on Pro-Touring.com