Results 1 to 20 of 29
Thread: Disc conversion nightmare
Hybrid View
-
09-04-2007 #1
Not sure if this is something you'd be interested in but i recently found this SSBC distribution block with a built in proportioning valve, might be a simple way to solve a couple variables in your problem
http://www.stainlesssteelbrakes.com/...ll-In-One&year=
Jeff K.
69 Camaro SS, 406 SBC, TKO600, 9" w/3.73 tru-trac, Speedtech Arms, AFX Spindles, Lee 670 Box, Baer GT front, C5Z rear. Hyperco Leafs w/ Fays2 Watts Link + Varishocks.
-
09-04-2007 #2All Vettes after 64 had 4WD. The HD sytems used a 1 1/8 MC the "plain" used 1". Reember also especially with alot more piston size you need the volume of a larger master also to move the piston. Drum wheel cylinders need ALOT less volume to move them. The Vette MC I have to use forone car deep recess for the pushrod, darn near 1".
You didn't mention if it actually stopped well eventhough it feels bad. Too much pedal ratio can still let you stop but loose the feel.
My Trans Am rear calipers have a similar sized rear piston has just a T in the front line and adjustable prop valve in the rear and stops great. Origially I had too much ratio pedal and it stopped good but had no feel.
09-04-2007 #3
Registered User
- Join Date
- Sep 2007
- Posts
- 162
Alot of information! I'm going to try your suggestions and see if I have any luck. Hopefully I can spend time on the car this weekend.
Thanks!





Reply With Quote



