Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 29

    Threaded View

    1. #1
      Join Date
      Sep 2007
      Posts
      162

      Disc conversion nightmare

      Hello,

      I'm new to the forum, in fact this is my first post. Currently my brake system seems to be my worst nightmare. Recently converted my rear drums to disc with advice from another forum and a friend who use to run an oval car. Starting to feel as though I should have bought a kit and spent 3x the money. The car ran for years with disc in the front and drum in the rear with no complaints. Problems started once I changed rear to disc. The following are the components I'm using:

      69 Corvette manual master cylinder
      original disc/ drum proportioning valve
      Front: small GM style caliper (79 Monte Carlo style)
      3/16" brake line
      Rear: same caliper as front with AFCO caliper brackets
      2 psi residual pressure valve between master and proportioning valve
      1/4" brake line form master to rear split
      3/16" line across rear to rear caliper hoses



      Problem: pedal has no feedback/ feel
      When I step on the pedal it does not become firm untill pedal is depressed 2". Both front and rear brakes are applied firmly after 3/4" of pedal travel but you would never know based on brake pedal feel. I believe the car will stop, but think it will have a very weird feel. I would expect the brakes to feel super sensitive.

      Thanks in advance,
      ED





    Advertise on Pro-Touring.com