Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 681

    Thread: Project FNQUIK

    Threaded View

    1. #11
      Join Date
      Nov 2006
      Location
      Ma.
      Posts
      5,560
      Country Flag: United States
      Not much progress this week, we had to move the remote oil filter because of my mistake. The fitting for the oil cooler stuck out further than I remembered and the mount had no room for the fitting. we made a bracket to mount it on the front bar Mike installed to replace the smaller front cross member on the sub frame, then made a bracket for the intercooler pump. I have no welder so everything has to go to Spaceman's house to be welded.There's more room than appears to be.

      (Heavy little sucker)



      The remote oil filter from here



      To here.





      Brackets will be cleaned up and either painted or powder coated.

      I picked up some air tools for the garage to make this easier.

      A MATCO TOOLS MT4880 .75HP STRAIGHT DIE GRINDER .




      A MATCO TOOLS (MT2883) .50 HP Variable-Speed Right Angle Die Grinder .


      A MATCO SE430K Silver Eagle Mini DA Sander Kit


      All used from E Bay but in great shape.

      I also got my spacers for the BMW rear wheels.





      I only needed spacers in the rear. I'll use these while I'm working on the car and sell them later when I'm done.
      Wayne
      Car FINALLY home !!!!!! lol
      Project FNQUIK https://www.pro-touring.com/showthre...ghlight=FNQUIK





    Advertise on Pro-Touring.com