Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 681

    Thread: Project FNQUIK

    Hybrid View

    1. #1
      Join Date
      Nov 2006
      Location
      Ma.
      Posts
      5,560
      Country Flag: United States
      We've been working on the car a few hours a day we installed the RS doors to figure if it would interfere with the intercooler reservoir. I'm going to put it right behind the passenger headlight in the same place Travis (Snappytravis) put his. I had been thinking about putting it there and seeing how nice his is, it was definitely a go.
      We made a platform to mount the tank out of aluminum and bolted it in to see how it fit .It will have a piece in the back for a tab to slide into and be bolted 2 or 3 places in the front and be covered with some type of rubber to prevent chafing the tank.

      Here's a quick shot of the platform test fit.



      We removed the factory balancer and are replacing it with an ATI super dampener. If you guys want a Harmonic dampener check out ATI blems on E Bay,for all types of engines you just need to be patient. Instead of the $465 I got one for $269 for my LSA, it doesn't come with the super charger pulley blem or not. If I had to find the blem on it to save my life the wife could sell the car because I would never find it........ The bolt came right out with my impact wrench.
      The problem was getting t he balancer off. We tried with a 3 jaw puller we had, no dice, then I went for an AutoZone loaner, wrong one back again, Then we got another one from AutoZone and it finally got it to move. About 3/16 of an inch, we had to go back to the first puller to finish taking it off, but the loaner was the only thing to get it to break loose.



      And finally in place ready to be put on.






      We also tried the Front accessory drive on for fit. I don't have the A/C compressor yet so that test will have to wait. The throttle body is a ported one from V Max in Florida.



      And something else that will help the build continue.
      HEAT!

      No more frost bite on this old bootie!




      Wayne
      Car FINALLY home !!!!!! lol
      Project FNQUIK https://www.pro-touring.com/showthre...ghlight=FNQUIK


    2. #2
      Join Date
      Nov 2006
      Location
      Ma.
      Posts
      5,560
      Country Flag: United States
      Yesterday we tried to mount the intercooler pump but it didn't work out too well, the hose that goes to the heat exchanger was going to interfere with the radiator so we're moving the bracket.
      We installed the Hamburger remote oil filter mount on the frame right behind the radiator. I will be running the -12 oil lines to the filter then to the oil cooler in radiator and back after I make my order for my hose and fitting, soon I hope.


      The next thing to try and stuff in there is the trans cooler in the white box in the bottom of the picture.



      Last week I installed the DBW pedal using the GM factory bracket that came with the controller and the DSE mount. It looks good.
      Thanks icemanrd19 for the pictures.






      Wayne
      Car FINALLY home !!!!!! lol
      Project FNQUIK https://www.pro-touring.com/showthre...ghlight=FNQUIK

    3. #3
      Join Date
      Mar 2013
      Location
      Napier, New Zealand
      Posts
      220
      Country Flag: New Zealand
      Quote Originally Posted by Motown 454 View Post
      Yesterday we tried to mount the intercooler pump but it didn't work out too well, the hose that goes to the heat exchanger was going to interfere with the radiator so we're moving the bracket.
      We installed the Hamburger remote oil filter mount on the frame right behind the radiator. I will be running the -12 oil lines to the filter then to the oil cooler in radiator and back after I make my order for my hose and fitting, soon I hope.


      The next thing to try and stuff in there is the trans cooler in the white box in the bottom of the picture.



      Last week I installed the DBW pedal using the GM factory bracket that came with the controller and the DSE mount. It looks good.
      Thanks icemanrd19 for the pictures.






      Was wondering what's a good way to mount my peddle , looks good, will look into it..cheers
      Damien
      Napier, New Zealand
      Project Page: https://www.pro-touring.com/showthread.php?99096-Project-Camaro-68-P-T-Muscle
      Next Project: 1956 Chevy Truck, Full C3 Suspension, Nascar Inspired




    Advertise on Pro-Touring.com