distribution 4 stud power block help

[ilikeike]

Im running an Aeromotive Phantom pump which needs its own keyed source to power it. This is the wire kit I purchased for it.

https://www.summitracing.com/parts/aei-16307

That’s a nice kit.
You just hook the red trigger wire of your kit to the EFI fuel pump trigger wire, pretty sure it’s blue on the sniper, check the diagram. It’s blue on my Holley HP, I use it to trigger an in tank pump and painless harness similar to yours.
But it will work just going to the key like you want.
You’ll just have an extra 12volt keyed igniting trigger wire to use for something else if you want I guess.