Ridetech Tru-Turn with big block

[dragonfly jones]

I called Lemons to see if there headers would clear, they said no. If theres room to be had for the clearance its seems like they would offer the provision. They said no.

[Chuck0379]

I e-mailed Dan as well and spoke to another custom header guy in the US and neither one would do it either. I said I would send everything for them to mock up and make a set of headers, but both said no. I got my current lemon headers modified, but they need to go back to moved about 1/2 further back then they will be fine. Cost $500 just to have them cut and tack welded for test fit. Once my shocks arrive I'm just going to send the whole car to the chassis builder have him do the headers and do my alignment and be done with it. Wish there were some engine mounts that moved the engine back an inch, or are there any?. Not to keen on welding the engine mounts stands to the frame.

I called Lemons to see if there headers would clear, they said no. If theres room to be had for the clearance its seems like they would offer the provision. They said no.