69 Camaro

[Jamess113]

Here are some shots of the the glove box, rear speaker enclosures and the intercooler.

[snappytravis]

Nice Fab work on the intercooler, I wish I had a little more talent in that department. I do good with angle iron!

[Jamess113]

Nice Fab work on the intercooler, I wish I had a little more talent in that department. I do good with angle iron!

Thanks Travis.

[Peter Mc Mahon]

Please, keep the pics coming! Nice fabrication work.

[Gil]

Please, keep the pics coming! Nice fabrication work.

X2

Awesome work !

[Jamess113]

Please, keep the pics coming! Nice fabrication work.

X2

Awesome work !

Thanks guys! Here are some pictures of the shell in epoxy and fill primer and finally some paint. The bottom is painted in a trim black with PPG DCU2060 clear. The red is 2012 GM Victory red.

[tmadden]

That back shot with it on the ground kept me motivated for over a year.

[Gil]

Beautiful work !

[minendrews68]

Dang son, your just a fabricating dude aren't you. Just curious, how many times have you had it together and pulled it back apart? A bunch it looks like. very nice build.

[Jamess113]

That back shot with it on the ground kept me motivated for over a year.

Cool! It's all going back together now so maybe you'll get some more motivation. That's if your project isn't already done. Those picture's were taken a long time ago......

[Jamess113]

Beautiful work !

Thanks Gil!!!!

[Jamess113]

Dang son, your just a fabricating dude aren't you. Just curious, how many times have you had it together and pulled it back apart? A bunch it looks like. very nice build.

Thanks Carl, I've had it together and apart to many times. I'm working on final assembly now.

[rlodad]

Did you fab the roll bar or buy it? If the later, who'd you get it from? Nice and clean!

[Jamess113]

Did you fab the roll bar or buy it? If the later, who'd you get it from? Nice and clean!

Thanks! It's a DSE. I had them bend the removable harness bar for extra seat clearance. I don't have any pictures of mine with removable bar but here's a picture of the last one I installed. The one in my car look just like it.

[Gil]

Job done is perfect ! Makes me want to cry.
Would kill to have the same underneath.
need more pics of the paint
Gil

[Twinstang]

What a nice project keep up the good work

[Jamess113]

Job done is perfect ! Makes me want to cry.
Would kill to have the same underneath.
need more pics of the paint
Gil

Here's some more pictures. The rear is a Currey 9" housing with an aluminum center. I'm running a Strange Aluminum 3 member with 4.10's and a True Track. The suspension is a DSE Quadra-Link with a Speedway splined sway bar. I would have run a DSE sway bar but they didn't offer one when I was putting it together.

[Jamess113]

What a nice project keep up the good work

Thanks!!!!

[Jamess113]

Here's some pictures of the frame all painted and mocked up again. It's a Wayne Due that I bought back in 2007 or 2008. I bought it back before DSE or Art Morison were making anything. I was told it was the last one he built. It has C5 control arms and uprights.

[Jamess113]

Some spec's on the motor. Wilson Billet intake, Pro Charger D1SC, Manley Rods, Stock LS6 cylinder heads (un-ported) Mahle pistons, Compression is 9.65:1, Bore 3.905, Stroke 3.622, Cam specs 230/242 duration @ .050 .591/.593 lift. 114 degree lobe separation. It made 732hp @ 6800 with 15PSI.