Infinity Camaro LS3 Project

[The Am1nal]

keep it coming!!!

[sebtarta]

Blev keep at it. Thank you for the LS3 intake.

[zipsimons]

crispy lines... lovin it!

[ff5013]

I cant wait to see finished car. my heart is already skipping a beat

[Blevinator]

crispy lines... lovin it!

Thank you!
Making sure it all looks right
before each next step is super important
to me on this car.

[Blevinator]

I cant wait to see finished car. my heart is already skipping a beat

Thanks for the comment!
Car has many surprises not seen here.
Want it to be one of a kind, at least for a little while.
Just bought a forged LS3 from Katech. Felt it was good insurance
since I will be strapping an Eforce on it.
Have my stock LS3 sold to another forum member.

[Blevinator]

Started working on the firewall. Applied Lizardskin. New subframe installed. Front suspension is almost done.
Welding in BMR subframe connectors.





Should have powdercoated the Ride Tech spindles before install.
They developed surface rust just sitting in the shop.
Removed them and powdercoated them black.

[Blevinator]

[TonyV]

great project....need to know how the lizard skin went on and are you happy with it...?

[Blevinator]

great project....need to know how the lizard skin went on and are you happy with it...?

The guy that applied it said it was easy to spray. I purchased the Lizardkin application kit to help things along.
To me, it made a huge improvement over the way the underbody looked. I am very happy with it.
We did quite a bit of work to make sure the bottom of the car would look great before spraying it,
including using panel bond on all seams. The car was stripped of all components,brackets, clips,etc. before spraying.
We also sprayed it with the subframe removed. I feel prep is 99% of what will make this application look good.
It looks much better than bedliner and should make a huge improvement as far as the noise level of the vehicle.
Will be spraying the interior with Lizardskin ceramic insulation early next week.

[TonyV]

good to know....i'm still on the rotisserie but plan on shooting it here in about a month...been working on prep as you said can't do enough. I also plan on shooting it with a single stage ureathane. How much did you use ........i bought 6Ga of the sound deadner and 4 Ga of the ceramic....?

[Blevinator]

I used 4 gal sound control so far. Probably will use the same on CI.

[Blevinator]

Rear Seat is in!
Mike's Custom Cars made this happen!
Very impressed with it!!

[WICKED_SS]

Very Nice Build! keep it up!

[67SSDan]

VERY nice man!

Dan

[Blevinator]

Very Nice Build! keep it up!

Thank you!

[Blevinator]

VERY nice man!

Dan

Much appreciated!

Car is having the firewall painted as we speak.
Will be in mechanics after that. Starting with all new wiring.
Decided to install all mechanics before paint, as I want to
avoid any damage to the final paint. Shouldnt be long now!

[HOSTILETAKEOVER]

Nice build! Top shelf pics.

I have sprayed my 69 Camaro inside and out with Lizzard skin SD and Ceramic insulation. I have been told that it needs to be covered in a coat of paint (on the underside) to protect it from the elements. Mine is not on the road yet but I can't wait to see how effective the lizzard skin really is.

I have also covered the inside with a half inch thick layer of foam sound insulator sheet where I could. I am aiming for as close to modern OEM sound levels as possible.

[Blevinator]

Car is at Sweedens Paint and Body in Garden Ridge Tx getting firewall smoothed and painted before major mechanical is started.
Finally, the fun begins!

[MrQuick]

Car is at Sweedens Paint and Body in Garden Ridge Tx getting firewall smoothed and painted before major mechanical is started.
Finally, the fun begins!

looks good but make sure they pull the sway bar and flip it over before they drop the engine in.