69 GTO Build

[ekmxryda]

Hi Gus,
I am going with a Vintage Air, or maybe a smaller Southern Air kit where everything mounts to the inside of the firewall. Plenty of options to pass the 4 tubes through the firewall, bulkheads grommets etc. if you browse the Vintage Air site you might get inspired. I plan on running them under the fender behind passenger side hood hinge, through the original blower motor hole.
http://www.southernrods.com/a-c-and-...ern-air-1.html

Was able to get the body sprayed in the high build epoxy primer.