Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 84

    Hybrid View

    1. #1
      Join Date
      Oct 2012
      Location
      British Columbia
      Posts
      614
      Country Flag: Canada
      Here we go with a small update. The Camaro is on the rotisserie and I'm finishing stripping the last of the interior out and getting it ready to spin so I can start working on the bottom. I thought I was at this stage a while ago but there seems to be an endless supply of little stuff to keep going.

      So I started with pulling the rear glass out and all is solid around the rear with no hidden surprises;
      Name:  image.jpg
Views: 2388
Size:  134.2 KB
      Name:  image.jpg
Views: 2326
Size:  427.4 KB


      Then I pulled out the windshield and somewhere along the life of this car someone thought it would be a good idea to metallic tape over the rust and then bondo and paint it black.



      Name:  image.jpg
Views: 2321
Size:  120.5 KB

      How is this for a chunk of bondo?

      Name:  image.jpg
Views: 2285
Size:  127.7 KB

      And they did it all the way across the lower part of the windshield

      Name:  image.jpg
Views: 2264
Size:  112.1 KB

      Dropped my SBC off at the Dyno earlier this week so I hope to have those numbers this week.
      That's it for now and I'll be back at it tomorrow and hoping to get her flipped on its side and start scraping off under coat. Yay
      Todd
      '14 ZL1, 6 speed and 6.2L of Super Charged Awesome!
      '67 Camaro SS in process. A long, slow, expensive trip...


      How hard can it be...

      Project Obsession
      https://www.pro-touring.com/showthre...ject-Obsession


    2. #2
      Join Date
      Oct 2012
      Location
      British Columbia
      Posts
      614
      Country Flag: Canada

      Dyno pull?

      Jim at Richmond Engines just called me and my 350 SBC is running and they've done some light pulls. I'll be stopping in there tomorrow morning to do some full pulls and see what this little fella will do.

      Anyone want to guess what this little 350 will put down for power?
      Attached Images Attached Images  
      Todd
      '14 ZL1, 6 speed and 6.2L of Super Charged Awesome!
      '67 Camaro SS in process. A long, slow, expensive trip...


      How hard can it be...

      Project Obsession
      https://www.pro-touring.com/showthre...ject-Obsession

    3. #3
      Join Date
      Jun 2008
      Location
      Acworth, GA
      Posts
      255
      Country Flag: United States
      Todd,

      "Very nice build" back at you. I am curious of your impressions of that TCI front subframe. It is a trick looking piece.

      Quote Originally Posted by Todd in Vancouver View Post
      Anyone want to guess what this little 350 will put down for power?
      I will play along. Not knowing the exact specs on the cam, I will give a conservative guess of 420 HP at about 6200 RPM and 380 ft. lbs. of torque at about 4500. I say "conservative" only because my gut tells me a solid roller cam may be a bit big for the RPM heads and also have a tigher LSA than what would work best with EFI. That being said, I would love to hear I was too conservative and you get much better numbers! Let us know!

      Mike

    4. #4
      Join Date
      Oct 2012
      Location
      British Columbia
      Posts
      614
      Country Flag: Canada
      Quote Originally Posted by gardnerme View Post
      Todd,

      "Very nice build" back at you. I am curious of your impressions of that TCI front subframe. It is a trick looking piece.



      I will play along. Not knowing the exact specs on the cam, I will give a conservative guess of 420 HP at about 6200 RPM and 380 ft. lbs. of torque at about 4500. I say "conservative" only because my gut tells me a solid roller cam may be a bit big for the RPM heads and also have a tigher LSA than what would work best with EFI. That being said, I would love to hear I was too conservative and you get much better numbers! Let us know!

      Mike
      Hi Mike,
      I also had concerns as I didn't want to be another one of "those" guys who over cam and over carb my car and wonder why it doesn't perform like it should. I did lots of homework before I purchased this camshaft and here are the specs on it. And, yes I will post the dyno sheet as soon as I get it in my hands from the shop. I'm hoping I'll be able to post some video as well once I figure it out tomorrow night.

      Solid roller, rough idle. Good cam for high performance street or mild strip applications. Needs 2500-2800 RPM stall speed converter, 9.5:1 or better compression, aftermarket exhaust system and 3.73 rear gear ratio.
      •Advertised Duration (Int/Exh): 267/273
      •Duration @ .050 (Int/Exh): 237/243
      •Gross Valve Lift (Int/Exh): .566/.578
      •LSA/ICL: 110/106
      •Valve Lash (Int/Exh): 016/016
      •RPM Range: 2500-6800
      •Includes: Cam Only


      Part Number: 40120731
      Previoius Part Number: 60131

      The TCI frame has been awesome to put together and the fit and finish was excellent. I've installed it twice checking the assembly and so far it's been all easy sailing. It will be a while before I can drive it and give any feedback but from everything I've read it performs very well and from what I see won a lot of races in the TCI '68 Camaro.
      Todd
      '14 ZL1, 6 speed and 6.2L of Super Charged Awesome!
      '67 Camaro SS in process. A long, slow, expensive trip...


      How hard can it be...

      Project Obsession
      https://www.pro-touring.com/showthre...ject-Obsession




    Advertise on Pro-Touring.com