Ridetech True Turn With ATS Spindles Brake Problem

[regal454]

Actually a 10" wheel will work on the ATS Spindle. if you are using a 18" wheel, DEPENDING on what steering arm you have, there are a few 3-4 different lengths and heights, we have found the best fitment is available using the unisteer rack and steering arm set up.

I know this is an older thread, but does any have any experience with 17" wheels and ATS spindles? What is the widest 17" wheel that will work with the spindle? What about using the "short" Z28 factory steering arms, will that aid in clearance? I would like to purchase a set of these spindles, but I would want to run a 17x9 and 275 front tire.