Ridetech True Turn With ATS Spindles Brake Problem

[killer69]

the full tru turn kit comes with their spindles. you can buy the kit without spindles though. this is meant for people who already have the ridetech spindles like me, not for people with other brands. the tru turn info on ridetech's site plainly says that the tru turn will not work properly with other brands of spindles.



evidently a 10" wheel won't clear the ats spindles either or the gentleman would not have bought the tru turn kit.

Actually a 10" wheel will work on the ATS Spindle. if you are using a 18" wheel, DEPENDING on what steering arm you have, there are a few 3-4 different lengths and heights, we have found the best fitment is available using the unisteer rack and steering arm set up.

The Truturn has been tested with the ATS spindle, and it is far from ideal, not to mention the caliper fitment issue. I had questioned Brett about the caliper fitment with the TruTurn and all their testing showed NO caliper issues. Now they apparently did not test it with the AFX spindle.