Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 35

    Hybrid View

    1. #1
      Join Date
      Dec 2003
      Location
      lost
      Posts
      2,607
      This is obviously a design issue with the LCA (terrible design). I have no idea why they left an additional inch or so below the actual ball joint retaining portion of the ring. My guess is that it is just easier (cheaper) to build it that way. That entire lower portion needs to be machined off. I would even look into cutting it off completely and welding on a screw in mount.



      That sure looks like a MIG weld…I hope those arms were fairly inexpensive, that ring is subjected to quite a bit of stress and really should have been TIG welded together. It may just be the work of a sloppy welder though.


    2. #2
      Join Date
      Jan 2005
      Posts
      34
      FWIW. The DSE LCAs have the lower outside portion of the ball joint housing cut away:


    3. #3
      Join Date
      Apr 2001
      Location
      La La Land, CA
      Posts
      2,241
      Country Flag: United States
      Speed-Tech must have forgotten to copy that part of it too.
      Tyler




    Advertise on Pro-Touring.com