Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 35

    Threaded View

    1. #17
      Join Date
      Aug 2004
      Location
      Walla Walla, WA
      Posts
      1,512
      Country Flag: United States
      I didn't see anything in this thread to indicate that Speed Tech refused to correct the clearance problem on their LCA's, although they may have.



      I also didn't see anything in this thead to indicate that DSE took back their early LCA's and corrected the clearance problem, although they may have.

      Clearly, DSE didn't "test" their early production LCA's they way you would have Speed Tech "test" theirs now, or else there wouldn't have been a clearance problem on the early DSE arms.

      Finally, as a hot rodder, pro-tourer and consumer, I don't think it helps the folks who come to this board to bash products because you think a product may have been copied. That, frankly, is irrlevant to me and to many others if the product works as advertised. It also doesn't help to bash a product because it may have MIG versus TIG welds, when (so far as I'm aware) no one has done any objective testing on whether TIG welds on the tubular LCA's are needed.

      In short, objective, fact based information is useful; biased "information" based on personal animosity is not.

      However, if anyone who was bashing the Speed Tech product has any actual facts about any actual failure to work as advertised, I'd like to hear about it so I can steer people away from a bad product. Until then, what I think I'm seeing is bias against a manufacturer who is not a member of the club.





    Advertise on Pro-Touring.com