2nd Chance Camaro - Let the Project Begin

[syborg tt]

The wire loom looks a little better but I am still not 100% satisfied so I will most likely be doing it over again at some point.



I placed the injector harness where it should go however my goal is to hide the wires under the manifold and have the wires run up and out to the injectors.





From the side it doesn't look to bad.



The new Drive by Wire Throttle Body that I will have to some how convince Mario to paint black.









Next up the Vaccuum line from the ECU to the underside of the manifold.













I left the hose long and will cut it when I place the manifold for the last time.