Results 1 to 10 of 10
Hybrid View
-
03-04-2010 #1
Registered User
- Join Date
- Jan 2008
- Location
- Winston Salem N.C
- Posts
- 159
Yeah I was able to get all the areas along the seam, except for this spot. The section in the upper corners by the trunk hinges. There is a square plate/brace that covers that section of the welded seam, it is to tight to get a spray or brush between the plate and the fender. It may be touching even, at any rate no way for me to coat that section.
-
03-04-2010 #2
Registered User
- Join Date
- Nov 2006
- Location
- Mountain Springs, Texas
- Posts
- 4,843
If your had any porosity in your welds and then applied filler directly over the seam then it may be moisture causing the filler to expand. Did you apply epoxy primer before you applied the filler?
1969 Camaro - LSA 6L90E AME sub/IRS
1957 Buick Estate Wagon
1959 El Camino - Ironworks frame
1956 Cameo - full C5 suspension/drivetrain
1959 Apache Fleetside
Reply With Quote
