Increase G-body track width/decrease scrub?

[driftinblzr]

I'm looking at 4x4 Blazer spindles (using 2wd hubs) which will function as a bit of a drop spindle, and I believe they are also taller than the G or S-10 spindle.

I don't think you'll be able to use a 4wd spindle without some fabrication. The lower ball joint points toward the ground, on the 4wd, compared to a G-body/S-series (2wd) spindle where the lower ball joint points up. In other words, the taper will be in the wrong direction.

Later, Doug