Results 1 to 19 of 19
Thread: Rack & Pinion Fitting Question
Threaded View
-
10-23-2008 #8
Nope, none of those will work. The O-ring is in the wrong location and the entire body is too long. The o-ring needs to be seated under the hex.
Here's what you need to do: Take an -06AN fitting and thread the flare side into the pressure port on the rack. If it screws in nicely, you have SAE fittings (-06AN threads happen to be 9/16-18). If not, it's metric.
Matt Jones
Mechanical Engineer
Art Morrison Enterprises
-





Reply With Quote



