Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 1 of 4 1 2 3 4 LastLast
    Results 1 to 20 of 62
    1. #1
      Join Date
      Oct 2007
      Posts
      1,872

      Gen 1 camaro rear suspension triple threat

      Of the three G bar, Lateral dynamics 3 link and the DSE Quadra link which would be the best for a car that would need to be a street car, Drag race car and a corner carver.

      I had selected the G Bar but after attending a drag racing event this weekend seeing old friends I am now considering a better performing rear suspension in a drag race condition.

      So how would one expect the g bar LD three link or DSE suspension perform with 600 hp and slicks



    2. #2
      Join Date
      Nov 2004
      Location
      NW Arkansas
      Posts
      1,742
      Unless going for every tenth, they will all work good.
      The lat d 3 link, while adjustable is not really set up for drag racing.
      I am building a full chassis chevelle, and built my own perimeter frame, and am installing a jakes rod shop front clip (he customized the lower rails, making them 2x4, not the normal 3x3) so i can tie it into my perimeter 2x4 chassis. Then in the rear i am doing his tq arm offering, which again for every last tenth is not it in drag racing, but for anything driven on the street, etc will work very well. The nice thing about the tq arm is, it hooks very well, for our pro touring type cars at the drag strip, look how well 4th gen camaros run, they have a factory tq arm.

      just my opinion
      Travis

    3. #3
      Join Date
      Oct 2007
      Posts
      1,872
      Hoping to work very closely with Jakes on my car I love his stuff. I just stumbled over Pics of a shop car of his on the lateral dynamics site. Anyone know if that 68 is still under construction... BTW if you read this Jake I have the week off and I am considering a ride up to see you :-)

    4. #4
      Join Date
      Apr 2006
      Posts
      1,027
      lol, just give me a call,so we can arrange it.

    5. #5
      Join Date
      Aug 2002
      Location
      Waleska Ga.
      Posts
      2,722
      Country Flag: United States
      You want be unhappy with the way Jake's suspension works!
      David Sloan

      If you’re suggesting sending men with weapons of war to take my weapons of war,then I’m fairly certain that’s what’s called an act of war… and the definition of tyranny.which coincidentally is the reason for the second amendment to begin with!


      https://www.pro-touring.com/showthre...ght=fun+camaro

      https://www.pro-touring.com/threads/...lcamino-build!

    6. #6
      Join Date
      Aug 2003
      Location
      Orlando, FL
      Posts
      8,745
      I think RTTHs proved all the suspensions mentioned work on the autocross with no clear advantage to one suspension or another except the obliviation of the field by the DSE Test Car. That thing is so tuned, and Kyle is so good.............. I do believe had Bret not had transmission issues and if he would have had his driver we would have seen a closer battle with the Test Car. I can say this because those guys battled week in and week out all year. But there is not doubt right now that Kyle and that second gen test car has the advantage, period

      At RTTHs at the dragstrip, the Air bars kicked ass. Nothing hooked like the Air bar cars including Vinnie, Bret and EmptyNest. In fact I think all the low times (G machines) came from Air Bar cars. And most of it was in the 60 foot times.All the other suspensions were suffering for traction.

      Watch this video. Both VERY similar motors, lSX based, low to mid 600HP range, one Wegner built, one Mitchell built. The air ride car is a Air Bar with the Prodigy Bar treatment, the DSE car is a Quadrlink. It is all in the short time.

      http://detroitspeed.com/video/autocross-ride-drag.htm

    7. #7
      Join Date
      Nov 2005
      Location
      Auburn, WA
      Posts
      1,359
      Quote Originally Posted by XLexusTech
      So how would one expect the g bar LD three link or DSE suspension perform with 600 hp and slicks
      Sounds like you need a true 4-link.

      Seriously though, is it a drag car or a handling car? You have to choose, and you can't have both.
      Matt Jones
      Mechanical Engineer
      Art Morrison Enterprises

    8. #8
      Join Date
      Jan 2003
      Location
      Arizona
      Posts
      5,394
      Country Flag: United States
      You can have it all with a new Jake's Rod Shop Torque Arm Kit. It's compatible with air ride and there's no floorpan intrusion, so installation is as easy as a g-bar. The front of the torque arm secures to the tail end of the front subframe--the strongest location on a 1st gen.

      I was so impressed with the system's composure at RTH4 that I never unloaded my car from Jake's trailer. He drove right past NY and up to Maine. I thought about it during the ride back to NY, called him up on the cellphone and told him to keep the car--put a torque arm in it. I can't wait!

      ________________
      Steve Chryssos

    9. #9
      Join Date
      Nov 2006
      Location
      Mountain Springs, Texas
      Posts
      4,880
      Country Flag: United States
      Quote Originally Posted by streetfytr68
      You can have it all with a new Jake's Rod Shop Torque Arm Kit. It's compatible with air ride and there's no floorpan intrusion, so installation is as easy as a g-bar. The front of the torque arm secures to the tail end of the front subframe--the strongest location on a 1st gen.

      I was so impressed with the system's composure at RTH4 that I never unloaded my car from Jake's trailer. He drove right past NY and up to Maine. I thought about it during the ride back to NY, called him up on the cellphone and told him to keep the car--put a torque arm in it. I can't wait!
      Nice to see something different from the other offerings. Jake, where are the mufflers, beside the gas tank? It also looks like an x-pipe could not be used, is that the case? Not sure how much you loose without the x-pipe but it seems to be common on most exhaust systems installed on these cars.

      I wish this and the AME options had been available a year ago when I was selecting my rear suspension.

      Don

    10. #10
      Join Date
      Jan 2003
      Location
      Arizona
      Posts
      5,394
      Country Flag: United States
      Different and smart. Full back seat, room for tailpipes, Bilstein shocks, etc.
      ________________
      Steve Chryssos

    11. #11
      Join Date
      Oct 2007
      Posts
      1,872
      Now were talking ! .... and for info purposes a torque arm will allow you to get into "Stock" drag classes since the rules are kinda Loop holy. They exclude "4 links" on camaros but allow OE 4 links on G bodies )adjustable arms and South side bars allowed. A loophole is a torque arm on F bodies beacause then come stock on later camaros...

      ;-) no more weight penalty

    12. #12
      Join Date
      Apr 2006
      Posts
      1,027
      Guys, my test car has race bullets on it for mufflers. As you can see the tq arm stays below the driveshaft , thus giving no intrusion into the car, also allowing the use of any size muffler in the stock location. The x pipe can and will work in the normal spot, under the tailshaft of the tranny, I have full 3 inch exhaust with 3 inch tailpipes. You will need to use the smaller x pipe so you can keep it packaged well, but you would want too anyway to keep good ground clearance, with my built headers no part of the rear susp or exhaust is lower then the subframe legs, speed bumps and raised speed tables are a non issue.
      I will post a few other pics later and steevos car has and will keep his xpipe
      Xlexus, come on up later in the week, we and you can drive my test car and we can mess with tuning so you can feel it in the seat of the pants
      Jake

    13. #13
      Join Date
      Nov 2005
      Location
      Auburn, WA
      Posts
      1,359
      Quote Originally Posted by streetfytr68
      You can have it all with a new Jake's Rod Shop Torque Arm Kit.
      Steve, are you that system allows for 100% (or more) antisquat and is preload-adjustable like a four link, which a drag car needs?

      Don't get me wrong, torque arms work well, but they aren't a drag-race suspension. They work just as well as any 3-link or triangulated 4-bar at the strip. For those who do use them for the drags, they are definetely not set up the same as a handling car.

      Every day we get calls from customers who want their car to be a dragster and a road racer. In the end, you have to choose; but it is easier to mount a set of drag slicks to a handling car to have fun at the strip...just don't expect it to 60-ft like a dedicated drag car.
      Matt Jones
      Mechanical Engineer
      Art Morrison Enterprises

    14. #14
      Join Date
      Jan 2003
      Location
      Arizona
      Posts
      5,394
      Country Flag: United States
      Something's gotta give, right? Lucky for me I place drag racing at the bottom of my list of priorities as follows:
      -Street
      -Packaging (e.g.: exhaust, floor pan intrusion)
      -Auto-X
      -Road Race
      -Ease of Installation
      -Looks
      -Price
      -Drag Racing

      My car runs 13.50's with leaf springs, 285 35 series Nitto NT555 tires and a 480HP small block. If I can run a 12.99 with the torque arm, I'll be thrilled. John Force I ain't.
      ________________
      Steve Chryssos

    15. #15
      Join Date
      Nov 2005
      Location
      Auburn, WA
      Posts
      1,359
      Quote Originally Posted by streetfytr68

      My car runs 13.50's with leaf springs, 285 35 series Nitto NT555 tires and a 480HP small block. If I can run a 12.99 with the torque arm, I'll be thrilled. John Force I ain't.
      Shouldn't be a problem. Art's '55 ran 12.60 in the 1/4 on 275mm BFG KD tires with our tri 4-bar.
      Matt Jones
      Mechanical Engineer
      Art Morrison Enterprises

    16. #16
      Join Date
      Jun 2001
      Location
      Orlando, FL
      Posts
      10,604
      Country Flag: United States
      I'll add my thoughts on the matter (and muddy the waters more, I'm sure).

      Kinematically, a 3 link is functionally equivalent to a 4 link, in terms of suspension behaviors in a straight line. (one caveat: most 3 links use a shorter upper link for packaging reasons) I've never tested it, but Katz tells me that my custom 3 link has some IC settings that will rival a drag-racing 4 link in terms of rear tire "bite" (aka anti-squat). I've never moved my link bars (I have two sets of holes in the lowers, and 3 sets of holes in the upper) to see.

      jp
      ​John Parsons

      UnRivaled Rides -- Modern upgrades for your ride.

      UnRivaled Rides recent project -- LS9-powered 69 Camaro

    17. #17
      Join Date
      Feb 2005
      Location
      Central Florida
      Posts
      580
      Country Flag: United States
      OK-- the timing of this post is excellent!!!

      I completed my car a couple of weeks ago and have taken it to the drags 2 times. I cannot get my car to hook up...60fts are a pathetic 2.12 to 2.24 with a best ET of 11.98. I know that my car is capable of low 11s (maybe high 10s) with a solid 60ft time.

      So...I am looking for a set up that will hook at the strip and still let me turn a corner.

      What kind of 60ft times are you guys running with your setups?
      Can anybody give me before and after examples of their 60ft times?



      Thanks,
      Patrick

    18. #18
      Join Date
      Apr 2006
      Posts
      1,027
      matts correct, anti squat is maxed out at around 62%with the tq arm. Xlexus, needs to clarify what he's looking for, i am pretty sure he wants it to be a pro touring style rear susp, that drags races really well, not a full blown drag race set up.
      drag racing was down on the priority list, but hey I think 1.50 short times are quick enough for a dual purpose car
      1.full back seat
      2.don't cut car all up
      3.3 link geometry
      4.anyone could install it
      5.package it with a quality custom valved shock
      6. we nailed it. now we need to show you guys how it works, yes there are compromises as there is with any non race chassis. However, i have 3 cars at my shop at different levels, one stock 68, drum brakes and all, steves twist machine car(art subframe,dse leafs) and my 69 test car, come on over and lets drive them, adjust for different driving style, so you can feel it in the seat of your pants, i promise you will be impressed. You will also get to see it happen in front of your own eyes.
      with the adjustable roll center, the car performs all aspects of pro touring nicely(raise phb for autox to loosen rear, which makes a huge difference in autox,lower it down for street and road race and it gives you all the confidence in the world in rear traction), although it does perform better on the road course, street, but its no slouch at the strip, i just added some juice to my test car and will bolt vinnys slicks on, and it will run a high ten with a 450 hp ls motor.
      Guys, anyone ins the ne area, I have 2 track days at www.nhis.com at end of october, feel free to come out and watch, and at one of them i can have passengers.
      edit-
      parsons is right, a good 3 link can be adjusted for more rear bite, but lets be serious even if we put slicks on, will our cars have all the drag race duty parts to not break when hammered, or trans brake'd? no, my tq arm with 60% anti squat, and adjustable phb is more then enough, i have a asa cammed ls6, and with phb in lowest setting, it will not spin tires from a roll, now raise phb up to autox setting(very loose,comes around nicely) it will spin the tires at 15-20 mph, these are toyo r888 r rated tire 100 treadwear, 335/30/18 rear, i will be dragging car once nitrous is hooked at quarter mile, i will leave phb up for autox setting, then lower it for some runs to show adjustability. Thats what pro touring is about right? doing multiple things well.
      Last edited by hotrdblder; 09-30-2008 at 11:06 AM.

    19. #19
      Join Date
      Apr 2006
      Posts
      1,027
      katz, also likes to run 50-60% as on road race, pro touring set ups(low profile 18 inch tires) as it allows you to get into throttle sooner in the turn then higher anti squat, because the rear tires don't get whacked with a bunch of power,when rolling back on throttle at apex. it allows you to be confident in rear traction, especially for us non race drivers. My tq arm allows you to start driving it on road course alittle tight(more rear traction,gives you more confidence.)then you can loosen the rear susp up little by little till the car is nuetral and as fast thru the turns as it or you(the driver wants to push)it.
      For autox you can raise phb 2 inches and makes the rear real loose, which is great in autox, but not as comfortable on the street and too loose for pushing the car on road course.

    20. #20
      Join Date
      May 2005
      Location
      Socal, Ca
      Posts
      924
      Jake,
      Do you have any video of your car in action at RTTH? I would like to see how much side to side action there is. Again, you have one killer stance on that car.

      David

    Page 1 of 4 1 2 3 4 LastLast



    Advertise on Pro-Touring.com