Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 6 of 6 FirstFirst 1 2 3 4 5 6
    Results 101 to 117 of 117

    Hybrid View

    1. #1
      Join Date
      Oct 2004
      Location
      Macon, Ga.
      Posts
      8,085
      Country Flag: United States
      Quote Originally Posted by Nine Ball
      Bill, sounds like you are labelling the LS1 engine as a fad.
      Tony, absolutely not. There is no doubt that LS1 is the future. My concern is people think LSx are the only option to be considered a pro-touring car.There are two types that will not have an LS in their car. The first are those like me who are unwilling/too stupid to convert. My concern is not for them. I worry about the other type. Those who can not afford an LS setup. Those are the ones I fear will feel unwelcomed here if they think Gen III are the only thing considered acceptable. I can remember back in the early 80's when I was too young and dumb to realize that I could have a nice ride even if it was not on par with what I saw in Hot Rod or Car Craft. Back then, I thought $20,000 was all the money in the world and there was no way I would ever be able to spend that kind of money on a toy.



      If I had to, I'd opt for more engine than suspension anyday.
      That statement shows that you are as passionate about engine performance as Katz is about suspension. Both of you are respected on this board for your knowledge in your area of expertise. Of course you tend to be more on the drag racing side of things where he is more of a road course guy.
      The whole point to this post is both of you are great examples of Pro-touring. If I have a question about LSx, you can believe I will ask you since you probably have forgotten more than I will ever know. The same with suspensions and Katz. That is what makes this site so great-knowledge.
      I just hate to see us get so hung up on setting perimeters about what we are or have to be.

      BTW With all I read about the new LS-6 in the new Z06, I think in a couple years ya'll might just win me over. Don't tell the posse but as soon as the supply can catch up with the demand and I can get a deal, you will probably see me in a (gasp) new Z06 anyway.
      Last edited by Bill Howell; 02-26-2005 at 09:22 PM.
      Bill

      Trailers are for BOATS!


    2. #2
      Join Date
      Feb 2003
      Location
      Houston, TX
      Posts
      3,446
      Country Flag: United States
      My setup was even cheaper. I bought a complete pull-out long block from a local guy that needed the cash and garage space. I paid $900 for my long block, sold all the Corvette stuff I couldn't use (harness, t-body, engine mounts, alternator, oil pan, fuel rail, LS6 intake, power steering pump, crank pulley, tensioner, etc...) and got about $800 for all that stuff. So, I had a low mileage long block for $100 cash.

      Deals come around, you just have to be ready for them!
      Co-Founder, LS1TECH.com


      Forged Wheel Dealer, Contact me for a quote!
      www.DV8Motoring.com

    3. #3
      Join Date
      Feb 2003
      Location
      Houston, TX
      Posts
      3,446
      Country Flag: United States
      Bill, your posts are really going to alienate the MOPAR and Ford guys. I bet they don't want LS1s under their hoods. LOL!
      Co-Founder, LS1TECH.com


      Forged Wheel Dealer, Contact me for a quote!
      www.DV8Motoring.com

    4. #4
      Join Date
      Feb 2003
      Location
      Houston, TX
      Posts
      3,446
      Country Flag: United States
      Sadly, most LS1 swappers think stock 300 rwhp is plenty. I'd venture to say that 90% of the LS1 swappers I've spoken to on Power Tour or at shows think a stock LS1 is the nuts. They often have no idea that a simple cam and header swap would net them another 50-60 easy rwhp.

      Steve HAD to modify his engine. He is a moderator on LS1TECH and we would have ragged on him if he had left the engine stock. hehe
      Co-Founder, LS1TECH.com


      Forged Wheel Dealer, Contact me for a quote!
      www.DV8Motoring.com

    5. #5
      Join Date
      Oct 2003
      Location
      Arvada, Co
      Posts
      2,119
      Country Flag: United States
      Holy crap! How did I miss this? Too busy working I guess. At any rate I will not add anything as it has been beaten to death.

      Brian

    6. #6
      Join Date
      Oct 2003
      Location
      Arvada, Co
      Posts
      2,119
      Country Flag: United States
      Holy crap! How did I miss this? Too busy working I guess. At any rate I will not add anything as I could not have said it any better than Mr. Tsubi.

      Brian

    7. #7
      Join Date
      Aug 2004
      Location
      CA
      Posts
      452
      Ah, I see another fellow member of Society of Performance Snobs chiming in! Maybe I'll have some SPS stickers made

      Quote Originally Posted by slownova
      ...i guess i don't know alot about cars and im trying to learn. maybe i made a mistake using the rims i did, maybe i didn't, however it is my car and my goals.
      Good! I wish you would have said that sooner.
      Don't take people's suggestions/comments as negative (at least try not to). Like I said, this is PT.com so many people come here in the interest of improving their cars' performance and many of them are speaking from experience.

      Hear them out, and if you still feel you 22" wheels suit better for what you're after, you should go with 22s.

      You can laugh at our cars at car shows all you want for having 17s and 18s. In return, we'll laugh at you when you hit a pot hole LOL. Seriously, watch out for curbs and pot holes. Just a friendly advice.


      Quote Originally Posted by Bill Howell
      Ok, Since it looks like ths thread will never die, let me open a new part of the equation.

      Kats, no doubt you are one of the more vocal members when it comes to suspension and it's role in pro-touring. Denny is another, but I know where he stands on this question.
      Does your car have a LS1 or if not is it fuel injected or carb?
      What is your opinion about that aspect of the sport?
      This is in not way meant to put you on the spot, I am just curious. There are some here that think LSx is a must. While I would love to have one, I know I will probably always stick to the carb. way of doing things. Since your car actually sees the track and you also drive it on trips, I hope you tell me it has a carb.
      I too feel an LSx engine, or EFI for that matter, is necessary. I'm not saying that just b/c I have Nailhead with a Holley 750. It gets lousy gas mileage (16mpg on highway), though not terribly bad for a 40-year old engine. I'm in the middle of cam & heads swap right now - hopefully that will boost the mileage to 17~18mpg. The transmission is a 2nd-year TH400, and 3.25:1 posi in a massive Buick 9.38" axle.

      Anyway, if anything I'd put more emphasis on the level of tuning whether EFI or carb. Just like I try to preach the importance of tuning suspension.

      I have a '69 Nova sitting in my garage. The car served as my DD from June '94 through October '01. It had a 377ci SBC with carb blow-through Procharger backed by Richmond 6sp. The car ran [email protected] at drag strip (as driven on street trim), and routinely got 21mpg on freeway sipping 92-oct gas. On one occasion driving to ocean beach, I got 22.3mpg driving at 55~60mph pace. For not much of an engine guy, I'm pretty handy with Holley carbs.

      On the other hand, I bet there are many cars with aftermarket EFI that get less gas mileage than my Nova did due to poor tuning.
      I'd rather see a well-tuned carb setup on a PT car than poorly executed EFI setup.

      That said, I would like to swap in an LSx engine in my Riviera one of these days. LSx attracts me b/c of their weight and efficient cylinder heads. It's hard to find SBC heads that match LSx heads (flow per port volume).

      As for your car not qualifying as a PT car, who cares? My car isn't exactly a PT car. I have no A/C or radio, which some people may feel as requirements. I'd like to put a radio in, but I have no need for A/C. Nothing beats driving through deserted highway in Mojave/Death Valley area in the middle of summer with windows rolled down (that's just me), and I don't need added weight on the nose.

      It doesn't matter to me how people classify my car. I just build it the way that makes sense for what I do. Of course, a 2-ton Riv isn't a good choice for road course duties however it does better job at showcasing my ability to design/tune suspension than doing the same thing in a Camaro. And my car has the coolest hideaway headlights known to mankind (OK, so I have some desire for good aesthetics). If someone thinks my car as a PT car, great! If another thinks it as just POS (which I really can't argue back), I'll surprise him on a road course.
      The first step of becoming a better driver is to attend a track event, time yourself, and realize the fact you really suck.

      Signed,
      A driver who laps Big Willow at 1:42.6 in a 134hp BMW - and I am still considered mediocre.

    8. #8
      Join Date
      Jun 2001
      Location
      Orlando, FL
      Posts
      10,604
      Country Flag: United States

      Two epiphanies

      I just figured something out. First, Steevo's sig: "4 fat tires are better than 2". What does that mean? Motorcycles are more fun than cars? Nope. I finally get it: drag cars have 2 fat tires and 2 skinny ones. Road racing cars have 4 fat tires. That makes them more balanced, right Steve? So 4 fat tires are pro-touring, 2 fat tires aren't.

      Damn. That had bugged me for months.

      Second, I was generally perplexed about why these definition threads so often got out of hand. People saying things, others arguing. Then name-calling, etc.

      I finally figured it out: it's that people are concerned that the definition will leave them out (thanks Dark Buddha ... your post yesterday got my brain going on this).

      My take is this: the definition threads are fun to bs over and talk about what makes a car a certain way: A way to give a car a general classification. But that's all they do. Each person gets to decide how much of the group definition they wish to meet. Some will get in all the way. Some won't. I consider it a guideline, or a measuring stick, and only that. Does it influence what I do on my car? Sure. However, I'd like to think that what I'm doing is because its what I want, and not for some arbitrary definition.

      So let the definition threads continue. They are fun to think about and write about. They are used to define us collectively. They shouldn't be used to define us individually.

      jp
      ​John Parsons

      UnRivaled Rides -- Modern upgrades for your ride.

      UnRivaled Rides recent project -- LS9-powered 69 Camaro

    9. #9
      Join Date
      Apr 2001
      Location
      Central CA USA
      Posts
      6,114
      Country Flag: United States
      JP,
      Thanks for that last post, you hit the nail on the head, we all aren't going to agree on an exact definition because we all don't like the same things.

      My car does not have a name, it's just "My Camaro" It will be what I want it to be and probably not fit any of the definitions to a T. It will probably be more of a Street Fighter with no air conditioning, but mainly because I live in a coastal area and have other cars to drive on longer trips on hot summer days. My car will not have a lot of eye candy on it, mainly because I lack the interest to make it that way, not that I don't enjoy cars that look nice. To please me, it has to be fast, but doesn't have to have 900 hp, it has to be BALANCED, I like that term!

      My "project" isn't listed on PT.com and I don't have a rendering of it. Maybe I'll list something when there is something that looks interesting enough. I'm not knocking others who have done more planning and concept work, I guess I'm just lazy or very buisy with other things. If I took the hours I spent here and worked on my car instead, I'd have it DONE!

      I think the "Pro" in Pro-Touring, or Pro-Street implies high quality of build, - a car that looks like a professional shop like DSE built it. "Touring" implies the car can/should be streetable. The more general we keep the blasted defintion, the more room there is for everyone. We may not achieve the full effect of a "Pro" build, but it's a good goal.
      Last edited by David Pozzi; 02-27-2005 at 10:50 AM.
      67 Camaro RS that will be faster than anything Mary owns.

    Page 6 of 6 FirstFirst 1 2 3 4 5 6



    Advertise on Pro-Touring.com