Introducing - Project 1/2-TRAK

[David Pozzi]

Can you reach the front rebound adjusters OK?
Check the rear shock eye bushing inserts for binding. I had to cut a little metal off the shoulders of them on OLC. It depends on upper shock location front to rear. Biggest chance of binding is at full droop. We used the 16" extended length Ride Tech shocks.



Another note. The shock eye aluminum inserts can fall out fairly easily. It's tempting to put Loctite on them to keep them in place. Don't do that on the small end of the shock. They need to come out when you change springs or do shock valving.
Your spring rates are perfect.

What are you doing for a rear bar? I think the Ride Tech bar is pretty stiff so you will need a matching rear bar.