Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 22

    Hybrid View

    1. #1
      Join Date
      Nov 2006
      Location
      Rochester, NY
      Posts
      177
      This idea kind of sparked my interest so I researched a bit. How does a supercharges 3.8 with a 5-speed and awd sound? Use a fwd motor, a bellhousing from a 96-99 4-cyl / 5 speed Dodgle Dakota, a clutch for a 3.8l 5-speed 4th gen Camaro / Firebird, an Aisin AX-15 5-speed manual transmission from a Jeep Wrangler, and a NP-249 AWD viscious coupling transfer case from a Cherokee. This transfer case work on the exact same priciple as a Syclone / Typhoon / Bravada / Astro transfer case but bolts directly to the back of the 5-speed transmission. Start with a 4x4 s-10 (same exact frame and suspension as a Sy/Ty) and you're all set. You would basically end up with a Typhoon but with an SC3800, a manual transmission and a much, much lower price-tag.



    2. #2
      Join Date
      Aug 2007
      Location
      Albemarle, NC
      Posts
      1,171
      Country Flag: United States
      Matt:
      my god, man. thats just sick. can you by any chance give me the references that you used to develop this?
      also, i amy go with a northstar after all, as i found out on a N* Fiero swap site that they use a rebalance 2.8 flywheel. and my machine shop said they'd do it for supercheap just to see this project get off the ground. still leaves me with headers and computer though, but im sure that you guys and the fiero guys can help that out.

      what is alo killing me is that i went to pick up the motor yesterday, regardless of me nothaving a truck to strap it into. None whatsoever in the yard anymore. i'll keep looking, but i found a bunch if nice looking northstars for about 20 bucks more. gotta love pull-a-parts prices. almost bought one, but the flywheel issue kept bugging me, and the superbowl was coming on soon.

      anyway, keep up the suggestiopns. the upcoming months will see the beginning of this build. think high end attention to detail on a beer budget street brawler.

      Michael
      Michael Crawford

      1970 plymouth Duster back under construction:
      https://www.pro-touring.com/showthre...uring-makeover

      1987 GMC S15 https://www.pro-touring.com/showthre...ct-drivabeater

    3. #3
      Join Date
      Nov 2007
      Posts
      266
      why not buy a a slightly used 5.3 LM7 outta a newer SUV or pickup?? They are just a smaller bore LS1 with a cast block. You can buy these DIRT cheap, like under $1k cheap. If you want to, you can bore it out and run ls1 pistons and you have a cast iron 5.7 for pennys. Then you get all the aftermarket support of the LSx motors without the upfront cost of the aluminum block motors. This is by and far the most cost effective way to go IMO and FYI I am going this route as well since I plan to boost my motor and like the strength of a cast block.




    Advertise on Pro-Touring.com