Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 22

    Threaded View

    1. #14
      Join Date
      Aug 2007
      Location
      Albemarle, NC
      Posts
      1,171
      Country Flag: United States
      ok, the whole build of this truck will have to be done for under 2008 bucks so i can compete in the GRM challenge with it, as well as keeping my wife from killing me for spending a bunch of money on another truck.

      i do believe that this makes the LS series motors out of my price range, as well as possibly the gen II/III motors.

      the idea of a mid engined all wheel drive S10 has had me tweaked all day. i know i could do it, but not under budget constraints. would be super cool though. maybe with a turbo'd northstar.....


      anyway, i like the idea of the blown V-6. especially with some home ported heads and throttle body. i am, however, still confused about the bellhousing/flywheel/tans. making motor mounts shouldnt be too much of a hassle.
      from what im able to comprehend, the bellhousing is a 60 degree v-6 unit, possibly BOP. does that make it similar/the same bellhousing as a 2.8 S10? if so, that would allow me to use an astro T5 based five speed instead of the funky camaro unit, right? also, the starter will be on the wrong side for an S10 bellhousing, necessitating drilling and tapping holes for a starter mount, or modifying the bellhousing. is this correct? as far as the flywheel goes, what one do i get? Camaro 3800?

      and while were at it, i cant seem to find the differences between the gen II and gen III motors, nor their model runs. anyone care to educate me?

      the reason i veto'd the northstar was twofold. 1. could not find a junkyard sourced flywheel. 2. i cant fabricate headers to save my life. but it crossed my mind, especially after being run with a megasquirt or some such.

      thanks, and please keep it up.
      Michael

      Michael Crawford

      1970 plymouth Duster back under construction:
      https://www.pro-touring.com/showthre...uring-makeover

      1987 GMC S15 https://www.pro-touring.com/showthre...ct-drivabeater





    Advertise on Pro-Touring.com