Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 681

    Thread: Project FNQUIK

    Hybrid View

    1. #1
      Join Date
      Nov 2006
      Location
      Ma.
      Posts
      5,560
      Country Flag: United States
      It’s going under the dash either above the pedals or just along side of them. I left the exact placement up to him.
      Thumper I’m almost 65 and I hope to drive it at least as long as I worked on it . If you do the math my kids can worry about selling it. Lol

      Wayne
      Car FINALLY home !!!!!! lol
      Project FNQUIK https://www.pro-touring.com/showthre...ghlight=FNQUIK


    2. #2
      Join Date
      Nov 2006
      Location
      Mountain Springs, Texas
      Posts
      4,880
      Country Flag: United States
      Quote Originally Posted by Motown 454 View Post
      It’s going under the dash either above the pedals or just along side of them. I left the exact placement up to him.
      Thumper I’m almost 65 and I hope to drive it at least as long as I worked on it . If you do the math my kids can worry about selling it. Lol
      BIM needs to be accessible imho. Glovebox or somewhere similar. I have had to use the diagnostic display and reprogram the bus address a couple of times. It will be a beeotch to do that with it buried under the dash.

      Come to think about it the same with the gear display and fan controller, they need programming. Will be tough if they are not accessible.

      Don
      1969 Camaro - LSA 6L90E AME sub/IRS
      1957 Buick Estate Wagon
      1959 El Camino - Ironworks frame
      1956 Cameo - full C5 suspension/drivetrain
      1959 Apache Fleetside




    Advertise on Pro-Touring.com