Abs!

[MonzaRacer]

THe big trick is getting the software programed(reprogramed ) to make sure it understands you have all 4 wheels running the same speed on the scanner.
For the most part a simple signal conditioner may be required similar to the DRAC (Digital Ratio Analog Control) that the older GM C/Ks used to have to make the speed sensor signal from trans make the lectronic speedo work properly, it basiclt turned a speed sensor signal to a squarewave (read cleaner signal as opposed to a sine waveform) for the dash cluster to read.
The big trick is to make sure the computer reads all 4 wheels the same going down the road.
A little work may also be required to tweak the software to understand that you have bigger tires, if the sizes are dropped or raised equally front/rear over the car the system came from your programming should be fine.
Im still working on some ideas for a universal system too.
Lee