Results 1 to 9 of 9
Thread: Demon Tuning Help!
Threaded View
-
10-21-2006 #5
The idle Eze feature is just to help add some idle bypass air for BIG cams to get the air moving to suck more fuel throught the idle curb circuit with less vacuum. I have yet to need that feature(or drilled butterflies) for any of my motors, even with a medium roller cam. If you are pulling 15" at idle I doubt you need any extra air.
For some reason equivalent Demons are jetted richer than Holleys. My Demon and Holley 850s with way different jetting gave the same HP and BSFC on the dyno. Air bleeds and metering block emulsion holes are some of the diffrences. Demons do seem to be a little fatter on the idle side.
The primary butterfly screw is what is used to set the idle on almost all carbs. Sometimes a little turn on the secoindary throttle blade screw can help a little.
-





Reply With Quote



