Results 1 to 20 of 91
Threaded View
-
07-19-2006 #1
BG Speed Demon 850 problems - carb experts please HELP
I finally got the GM 572/620 installed and took it on it's maiden voyage this past Monday. The engine comes with a BG Speed Demon 850 (#1563010 - mech secondaries). The carb idles fine (900-1000rpm) and when you're "on the gas" it runs strong and smooth all the way to 6000rpm. The problem is when I'm trying to "cruise" or hold the throttle still for a constant mph. When holding the throttle still, the carb surges and stumbles, NO popping/backfiring through the carb, more of a surge. It feels like it's going from lean to rich, lean to rich which makes the car surge/stumble. It doesn't matter if I'm doing 10mph in 1st or 75mph in 5th, when holding the throttle still it's the same result. As I mentioned it idles fine, but when taking off I feel the same stumble between ~1000-2000rpm.
I followed the manual that came with the carb and set the butterflies (.020 slot showing) and idle mixture screws (3/4-1 turn out) as recommended. Out of the box the carb was jetted 85/93 with a 6.5 power valve. I have the inital timing set to 20 degrees and it advances to 36 around 3500rpm. Here are the things I've done so far at the recommendation of BG tech support:
- I went back through the manual and double-checked the baseline settings
- I changed the primary jets from 85s to 87s - thinking we might have a lean condition - no improvement/change
- I changed the jets from 87s to 83s - since going up didn't help I figured I'd go the other way - no improvement/change
Any thoughts on what might be the issue? I'm thinking of plugging the power valve next to take that out of the equation.
Here are the specs of the carb:
MODEL #850
PART #1563010
VENTURI SIZE:1.562
IDLE AIR BLEEDS PRI:.070
IDLE AIR BLEEDS SEC:.063
H.S. AIR BLEEDS:.028
BOOSTER TYPE:DOWN LEG
BOOSTER LEG:.184
SQUIRTER SIZE:31 STD.
BUTTERFLY SIZE:1-3/4
AIR HOLE SIZE:NONE
PUMP CAM ## 330
PUMP CAM COLOR:PINK
METERING BLOCK # P.A-12400
METERING BLOCK # S.A-12401
SIPHON BREAK:.028
E-HOLE POS. #1.031
E-HOLE POS. #2 N/A
E-HOLE POS. #3.031
E-HOLE POS. #4 N/A
E-HOLE POS. #5 .033
P.V.C.R. SIZE:.059
TRANSFER SLOT RES: OPEN
IDLE FEED RESTRICTOR .035
MAIN JETS PRI: #85
MAIN JETS SEC:# 93
POWER VALVE PRI: 6.5 STD.
POWER VALVE SEC: N/A
LINKAGE TYPE: PROG.
N&S SIZE/TYPE: 110-VITON
ACC. PUMP DIA. SIZE 30CC
Thanks!
-





Reply With Quote



