Results 1 to 9 of 9
Thread: Demon Tuning Help!
Threaded View
-
10-21-2006 #2
sounds that the box jetting is a tad rich for your combo or floats might be sticking.
what is the fuel pressure at the carb??? should be 7.5 lbs.
on the ez idle..... does the performer intake have a ridge dividing left and right sides or the planes. is the gasket on the bottem of the carb covering the ez-idle hole? the manifold might have to be clearanced for the idle. it is possible that this is happening.
you might take the metering blocks off and jet down about 4 jet sizes to begin.
check the above and let me know. hopefully this helps
-





Reply With Quote



