Results 1 to 9 of 9
Thread: Demon Tuning Help!
Hybrid View
-
10-21-2006 #1
The out of the box jetting is 76 primarys and 83 secondarys. The primary power valve is 6.5 with 31 squirters in both front and back.
The fuel pressure is 6.5 to 7 psi.
The intake has a divider between the left and right sides, but I don't think it goes all the way to the top of the intake. I think it's about 1/2" to 3/4" lower than where the carb sets, but I'll check. The gasket came with the carb and is open in the center.
Would you go 4 jet sizes smaller on front and back or just the front.
Thanks for the help,
Jim
-





Reply With Quote



