Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 22

    Hybrid View

    1. #1
      Join Date
      Feb 2006
      Location
      SoCal
      Posts
      85
      thanks, guys, i really appreciate your input. I ignored one run once i realized it was behind the engine, completely, the other i'll gently remove with a razor, then wetsand until i'm happy, and buff with some 3M. I was just really bummed at the time, making a stupd ameteur mistake by being impatient. live and learn..
      olly



      here's how it came out... i'm actually pretty happy with the results.
      1967 Camaro RS
      LS1, T56, LT'S, LS6 intake, ASP pulley,C6 Z06 clutch, Detroit True-Trac, 4:10 gears, GM 8.5 rear, strange 30spline, HOK Cinnamon Pearl Paint.


    2. #2
      Join Date
      Apr 2005
      Posts
      381
      Country Flag: United States
      Quote Originally Posted by 67RScamaroVette
      thanks, guys, i really appreciate your input. I ignored one run once i realized it was behind the engine, completely, the other i'll gently remove with a razor, then wetsand until i'm happy, and buff with some 3M. I was just really bummed at the time, making a stupd ameteur mistake by being impatient. live and learn..
      olly

      here's how it came out... i'm actually pretty happy with the results.
      Looks great! I cannot say that I recall my "painter" friends mention razor blading a run. Just like the others state....let it dry/harden and wet sand it out. You will be surprised at the results. If you catch an edge of the razor on a flat surface, you'll be fixing more than the run.

    3. #3
      Join Date
      Nov 2004
      Location
      NW Arkansas
      Posts
      1,742
      Quote Originally Posted by cad
      Looks great! I cannot say that I recall my "painter" friends mention razor blading a run. Just like the others state....let it dry/harden and wet sand it out. You will be surprised at the results. If you catch an edge of the razor on a flat surface, you'll be fixing more than the run.
      you can razor blade a run out but the blade has to be properly prepped....it is easier to razor blade them out in my opinion!
      KENNY DAVIS HOTRODS

    4. #4
      Join Date
      Jul 2002
      Location
      Muskegon, MI
      Posts
      4,494
      Quote Originally Posted by Travis B
      you can razor blade a run out but the blade has to be properly prepped....it is easier to razor blade them out in my opinion!
      I agree. Using the razor blade takes all of the mills off instantly instead of sanding all the mills off the run. You just have to be careful with the razor just like when you shave your girlfriends....um nevermind.
      Adam_______Offical Car Name "ILLUSION"
      383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
      ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign

    5. #5
      you will never get the run completely away if you just wet sand, there will be alittle wave where the run is, i razor like i would a block sander and run it over run till run is down to same level as the surrounding clear, i then hard block with 1000-1500-2500 then buff and it is 110% gone, BUT you had better hope you have some clear onthere to do that. goodluck let us know
      jake




    Advertise on Pro-Touring.com