Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 20

    Thread: Infinity box

    Threaded View

    1. #16
      Join Date
      Nov 2011
      Location
      Wylie, Texas
      Posts
      302
      Country Flag: United States
      I designed my own infinity box. The i-boxes can take up a lot of space, they have the power cells and then a master cell and if you want automatic power windows then they have a separate box for that. To wire my car would require 6 i-boxes (3 power cells, 2 inMotion, and 1 master cell) and at 6.5"x7.25" that starts to take up a lot of space not to mention the cost. With my design I did it all with just 3 modules, one under the hood one in the cab and one in the trunk. Each one of my modules is a master cell, a power cell and an inMotion cell all in a space of about 6"x7" per module. With my module I can do everything the i-box does and more. I added an A/D input for an analog temp sensor so I can control my radiator fans as the temp varies whereas the i-box requires a temp switch which only works at one temp. I use this same A/D input connected to a GM light sensor for automatic headlight operation. That feature was kind of an afterthought and if I ever do another revision of the board I want to refine that feature a little more. I also want to improve the quiescent current as I'm currently around 4mA and I know I can get that down to around 1mA maybe slightly lower.

      Some of the special functions that I use my modules for are: pwm control of the radiator fans; controls Camaro RS headlight door motors; one touch up/down power windows, controls reverse lockout solenoid on my T56, clutch and neutral safety switch, automatic headlights, and I also have it setup to automatically turn off the headlights if I forget to do it myself when I turn off the ignition key. Of course it also controls all the lights and horn. Another nice thing is that it doesn't care if you're using LED blinker bulbs or incandescent bulbs it will always blink at the same rate since it doesn't require a flasher module.

      It's been a fun project and I have learned a lot about auto wiring challenges. The most challenging part is the software to make it all work and I'm sure that's where the largest chunk of your money is going when you purchase one of these systems.






    Advertise on Pro-Touring.com