Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 20

    Thread: Infinity box

    Hybrid View

    1. #1
      Join Date
      Oct 2014
      Posts
      266
      Country Flag: United States
      Sorry for the delay getting back to people, been busy with work/family stuff.

      Here's how I was using the CAN setup:

      I designed my own control box (similar to what you were sent Andrew) that had 16 channels of input that were monitored by an Arduino. I used the factory switches in the car to switch them to ground, that way there was no load on the factory style switches. I then process those switch signals into CAN frames and put them on the line. Depending on which version of my setup (I had one with relay controllers I made, one with the Eaton CAN box, and now I've settled on the ECUMaster PDU), the control boxes are located in other places in the car (under dash and in trunk). Those boxes read the CAN signals and turn on/off lights, horns, fans, etc.

      Here's a code example I wrote:

      https://github.com/analoghan/CANbus_BCM_Controller

      There's more code there (in my Github) that you can look at if you like as well.

      1988 Mazda RX7 - Forged LS/T56, 76mm turbo, ProEFI, Ford 8.8 - Sold
      1965 Mustang Coupe - TT Coyote, TR6060, Haltech, big brakes, updated suspension.
      2007 Aston Martin V8 Vantage - Full bolt-ons
      2016 BMW 428iX GranSport - Stock...ish.





    Advertise on Pro-Touring.com