1960 Falcon

[Walther]

The front mounts for the sub-frame I found to be a bit more complicated. Using scrap pieces of 2x2 square tube, angle iron, 1/4" plate I was able to get it mounted. Not having a frame table slowed the process down considerably, as I had to move the sub-frame in various directions several times to get it squared to the chassis. I'll probably add more gussets and cross braces. I obviously don't want the sub-frame moving around. I'm more concerned with lateral movement, as I anticipate tremendous side loading. If y'all see anything I should add or that I missed, please comment.