Bugzilla - Mid Engine Madness

[Bugzilla]

Now that the splitter is done, time to move on to the next thing. Suspension work. 3 main things I will be working on. First is simple. Rear spring change. Going from 300# to 450# springs. Next up is going to be the steering. I dont like how the angle is on the heim that mounts on the spindle. At full droop, which isnt much, its at the max angle. Even at ride height its at a bad angle. So I am going to chop off the part of the spindle that the heim mounts to and weld in a new mount that sits at the correct angle. I need to do this mainly because I am also going to raise where it mounts to the rack by about an inch. I am doing this to help with bump steer. I still have a little and this should solve it. Let even more fun begin!